Thingiverse
WaveShare 5inch Display Housing and Display Mount by nexus511
by Thingiverse
Last crawled date: 4 years, 1 month ago
NOTE: Before printing please check, if it looks sane for you! Some of the models around thingiverse seem to have been designed for a different version of the display. My display and my Raspberry did not fit into those housings, so I designed this one.
This model contains a housing that fits a WaveShare 5inch Display (Version 2) including a Raspberry PI 3.
The project contains two versions of the model:
normal box without a mount
housing with a "wall mount" with a movable arm
I use the second version to mount a Raspberry PI running Pronterface mounted to my printer-housing.
The movable arm allows routing cables inside the arm. It is basically possible to also route the power-supply inside the arm, but I still need to solder micro-usb connector that is small enough to fit into the housing.
To close the housing, I used the spacers included in the WaveShare package including addidional M3 screws for the front-plate. The arm is fixed with M3.5 metal screws. Those can be easily removed to allow access to the USB and ethernet-ports of the Raspberry PI.
This model contains a housing that fits a WaveShare 5inch Display (Version 2) including a Raspberry PI 3.
The project contains two versions of the model:
normal box without a mount
housing with a "wall mount" with a movable arm
I use the second version to mount a Raspberry PI running Pronterface mounted to my printer-housing.
The movable arm allows routing cables inside the arm. It is basically possible to also route the power-supply inside the arm, but I still need to solder micro-usb connector that is small enough to fit into the housing.
To close the housing, I used the spacers included in the WaveShare package including addidional M3 screws for the front-plate. The arm is fixed with M3.5 metal screws. Those can be easily removed to allow access to the USB and ethernet-ports of the Raspberry PI.