Thingiverse
Washing Helper for Magnet Stirrer by XPlusE
by Thingiverse
Last crawled date: 5 years ago
A small but handy little helper so I don't have to fish with tweezers for printed parts after I washed them in a glass on my magnet stirrer.
This little helper contains a lower part where the upper part rests upon. The upper part has a grid with spikes on it to let the cleaner circulate within the glass and separate the prints from eachother. Just lift the upper part out of the cleaning fluid when done with cleaning. Under the lower part the magnet can rotate and the upper part is there to place your prints on. When you have small or flat parts, use the longer 20mm spikes. For bulkier parts I added a second holder with 10mm shorter spikes.
This little helper contains a lower part where the upper part rests upon. The upper part has a grid with spikes on it to let the cleaner circulate within the glass and separate the prints from eachother. Just lift the upper part out of the cleaning fluid when done with cleaning. Under the lower part the magnet can rotate and the upper part is there to place your prints on. When you have small or flat parts, use the longer 20mm spikes. For bulkier parts I added a second holder with 10mm shorter spikes.