Thingiverse
Warthog Joystick Hotas - DMS 4-way switch MOD by BrziJoe
by Thingiverse
Last crawled date: 4 years, 1 month ago
This is a cap for Warthog Hotas (Joystick) 4-way thumbstick - the lower right one, it is with mod more like pyramid design, what is far easier to use, especially if you need to use all 8 directions.
I did it on Ender 3 pro, no scaing, 0.16mm resolution, with tree support from under side.
I should make it at least 0.5mm thicker, as some small gaps are visible after printing.
Catia file is here if somebody need to make changes.
PS: I had to cut a bit of material after assembling it to hotas, as in direction up there was collision with "Nose up" part. No biggy.
I did it on Ender 3 pro, no scaing, 0.16mm resolution, with tree support from under side.
I should make it at least 0.5mm thicker, as some small gaps are visible after printing.
Catia file is here if somebody need to make changes.
PS: I had to cut a bit of material after assembling it to hotas, as in direction up there was collision with "Nose up" part. No biggy.