Thingiverse
Wanhao Duplicator i3 Z-Axis Endstop Switch Bracket by BearsFan315
by Thingiverse
Last crawled date: 4 years, 7 months ago
This is a mod I made to the one designed by evadeninja (http://www.thingiverse.com/thing:906366) I made the Slots wider
Both Brackets have 2x 2.5mm Holes for Switch mounting w/ 4mm Hex for m2 Hex Nuts on back side. and Permits Flush Mounting to frame. Also 2.5mm wide Slots for Height Adjustable Mounting in Factpry Threaded Holes in support arm.
Versions are marked on Top for Reference
v1: Slots are .3 mm from Nuts total of 14.5 mm Travel
..... Works Great for the 3/32 glass I bought from Lowe's.
..... Can raise bed almost all the way up and NOT hit the extruder when HOMED
v2: Slots are 1.8mm from Nuts total of 13.0 mm Travel
..... works for thicker Glass
Both Brackets have 2x 2.5mm Holes for Switch mounting w/ 4mm Hex for m2 Hex Nuts on back side. and Permits Flush Mounting to frame. Also 2.5mm wide Slots for Height Adjustable Mounting in Factpry Threaded Holes in support arm.
Versions are marked on Top for Reference
v1: Slots are .3 mm from Nuts total of 14.5 mm Travel
..... Works Great for the 3/32 glass I bought from Lowe's.
..... Can raise bed almost all the way up and NOT hit the extruder when HOMED
v2: Slots are 1.8mm from Nuts total of 13.0 mm Travel
..... works for thicker Glass