Wall Spot Lamp cnc/laser by ZenziWerken

Last crawled date: 3 years ago

This tiltable wall spot lamp is intended to be used with a GU10 socket and mounted
vertical, over a mirror in a bathroom for example. Even with ventilation openings using a classic halogen bulb might not be the best of all ideas, you should resort to a modern LED bulb. I got the ceramic socket from a hardware store for a few bucks. The cable were long enough to feed them through the foot.
This build was done from 6.3 mm beech plywood using a desktop cnc-machine by Stepcraft with a 1.2 mm spiral toothed end mill. A vacuum machine bed simplifies the process significantly, because you don't need to camp the material, thus it stays pretty flat. Further more I don't need tabs on the parts resulting in less sanding.
Visit https://www.zenziwerken.de/en/ for more interesting designs. Consider a donation if you like the build.
Keep in mind that the stl-file is for three dimensional viewing purpose only. It will not print on an FDM printer.