Wall Pegs, Gun Safe Pegs, Wall Mount, Revolver/Pistol Mount

Last crawled date: 4 years, 2 months ago

Hi!
This is a simple Design for a wall hook or wall mount. You can use it for a bunch of different things but I used two of those to mount my revolver to the inside of my gun safe door. It saves space on the shelf and is easily sturdy enough for a 6" K-Frame Revolver.
It is sized to be mounted with Tesa Powerstrips (it's a little smaller than the strips themselves to make it easy to remove). Print with the Mounts pointing upwards, no supports, 20% infill and 3x0,4mm walls (more walls=sturdier print).
Important: the support brace should be pointing down when mounting. It is designed to put
(mostly) compression force on the adhesive. If you mount it upside down you will stress the adhesive in tension and increase the risk of it peeling off.
It's worked for a few months for me by this point without any problem but obviously I can't guarantee you the same results depending on print quality, prep and chosen adhesive.
First picture shows mounting orientation, second picture printing orientation.