Wall mount PC (ver 1.0) by bomberjaco

Last crawled date: 3 years ago

Hi! I was bored one day and decided I wanted to give a new life to an old PC I have at home. I'M AN ABSOLUTE BEGINNER WHEN IT COMES TO DESIGN AND I HAVE NO EXPERIENCE WITH 3D PRINTING, but these are the parts I designed for a wall mounted project in a simple 13mm MDF board which I'll paint. Just a few holes for cable management and that's pretty much it.
(A friend of mine is kind enough to offer to print all these parts for me, as soon as they're printed I'll post photos)
Specs:
Mobo: DFI LP JR p45T2RS
PSU: Corsair 750W
Cooler: Xigmatek Dark Night
VGA / GPU: EVGA GeForce 210
3 old SATA I Hard disks
So, I basically designed a few components:
1x PSU bracket: it's mean to hold the PSU in place. Hexagonal structure was designed to make the structure strong enough but lightweight.
1x PSU cable concealer: (don't know if it's the right name). It's to supposed to hide all the cables that come out of the rear of the psu.
3x HDD bracket: These are meant to hold 1 3.5" HDD each one. They are stackable, in case you don't have room to place them individually.
9x MOBO stands: these are pretty obvious, they are ment to hold the Motherboard in place, securely firm and 10mm above the base.
4x acrilyc panel stands: I designed these for future use, since I have no plans of adding a frontal acrylic panel at the moment. (180 mm long, since a have a HUGE cooler)
4x acrilyc panel bolts rear: these are designed to hold the 4 stands to the MDF base.
4x acrilyc panel bolts front: these hold the acrylic panel to the 4 stands.
These project is in progress, I'll be updating this with pictures and new designs (if necessary) to keep thins up to date.