Wall Holster for Bosch eBike Battery Charger 36-4 by Nanocube

Last crawled date: 3 years, 1 month ago

A wall mounted holster for a Bosch 36-4 eBike charger so I dont keep kicking it around on the floor. Holds the charger pretty securely, it's not going to fall out.
Jan-2020 : I have uploaded a new version of this; with a clip to hold the charger plug when not in use. I also slightly updated the design to tighten the fit on the 'wings'. I have uploaded models for both left and right clips, plus a 'no clip' version.
My specific charger has the part number 0 275 007 907, but I suspect this fits any of the 36v 4A chargers in the powerline range.
For reference, on my charger the base is 75mm wide and 170mm long. The top is 85mm wide and 50mm tall at it's maximum (measured from the base, not the feet).
But: big thanks to @zlogg, who pointed out that this does not work with the 36/6 fast charger models, it is designed for the 36/4 normal (4 amp) chargers.
There are two 5mm mount holes (+ recess and adjustment) for mounting but my target wall is 35+yr old reinforced concrete and I didn't want to borrow my neighbours SDS drill (again), so I also put a big base on it and have stuck to the wall with carpet tape..(strong stuff). I deliberately left a big air channel behind this to assist cooling.
PS: sorry for the awful lighting in the photos, my phone camera did not cope well with very black objects on a white wall.