Warning. This content is not moderated and could be offensive.

Thingiverse

Wall bracket for IKEA Svärta loft bed by ndupont

Wall bracket for IKEA Svärta loft bed by ndupont

by Thingiverse

Get from Thingiverse

Last crawled date: 3 years, 1 month ago

Sleek wall bracket for the IKEA Svärta loft bed.
It will keep the frame 4cm from the wall and prevent any movement.
See also the anti vibration pads : https://www.thingiverse.com/thing:2796540
Print it flat on the bed for optimal resistance. Without brim or support, with 3 perimeters (1.2mm walls) and 1.2mm top/bottom surfaces. 20% tetrahedral infill.
The bracket can be printed with 0.32mm layers, and the grommet with a 0.1mm thickness.
Print a pair of each STL, use M3 20mm hex screws with the matching nuts.
In the wall use 5mm screws with 8mm plugs.
Add an adhesive felt pad, or scrap of rubber between the main part and the bed tubes.
Some action : https://www.youtube.com/watch?v=NOQPcDJMIiU

Tags

ikea ndupont bed loft svärta bracket wall

Similar models

Night lamp hook for IKEA Svärta loft bed by ndupont

Night lamp hook for IKEA Svärta loft bed by ndupont

...t bed by ndupont thingiverse night lamp hook for ikea svärta loft bed it requires a pair of m3x10mm hex screws and matching nuts

Anti vibration pads for IKEA Svärta loft bed by ndupont

Anti vibration pads for IKEA Svärta loft bed by ndupont

...ible as well (it has a flat top surface) if your flexible filament is not flexible enough, just insert it upside-down in the base

IKEA Svärta Loft Bed Frame with Desk

IKEA Svärta Loft Bed Frame with Desk

...ated product name. designed by tord björklund #bed #bed_frame #bunk #desk #gray #grey #ikea #loft #svarta #svärta #tromso #tromsö

Bunk frame bed SVÄRTA by ikea

Bunk frame bed SVÄRTA by ikea

...bunk frame bed svärta by ikea 3dwarehouse bunk frame bed svärta with the necessary items for fast using in scenes

IKEA Kura clip for IKEA Svärta loft bed by HCP

IKEA Kura clip for IKEA Svärta loft bed by HCP

...d bracket. you may need to use a 10mm drill bit to remove any over extrusion inside the hole, depending on your printers quality.

IKEA Tromsö Loft Bed Frame

IKEA Tromsö Loft Bed Frame

... model. designed by tord björklund #bed #bed_frame #bunk #desk #ikea #loft #svarta #svärta #tord_björklund #tromso #tromsö #white

Phone holder for Ikea Svärta by S4mmytin

Phone holder for Ikea Svärta by S4mmytin

... but it can hold lots of stuff. i printed it with 0.4mm resolution to save time and i used 20% infill. designed with solidworks.

Bunk frame bed SVÄRTA by ikea

Bunk frame bed SVÄRTA by ikea

...bunk frame bed svärta by ikea 3dwarehouse

Minecraft Torch to Ikea Svärta Bedpost Bracket

Minecraft Torch to Ikea Svärta Bedpost Bracket

...t has a diameter of 38 mm. 4 m4 nuts, 4 m4 x 20mm or 25mm allen screws and 2 m4x 6mm countersunk screws are required for assembly

ikea TROMSÖ Loft bed frame holder by oferfrid

ikea TROMSÖ Loft bed frame holder by oferfrid

...y oferfrid thingiverse frame holder for ikea tromsö loft bed this is used to attached the bed to the wall designed using freecad

Search for 1807475 Similar models

Svärta

Ikea SVÄRTA hook by marcoraber

Ikea SVÄRTA hook by marcoraber

...it to maintain distance from an eventual wall.the hook part is designed to fit an asus zenfone 2, but it can hold lots of things.

Phone holder for Ikea Svärta by S4mmytin

Phone holder for Ikea Svärta by S4mmytin

... but it can hold lots of stuff. i printed it with 0.4mm resolution to save time and i used 20% infill. designed with solidworks.

Hook for IKEA VITVAL TUFFING SVÄRTA

Hook for IKEA VITVAL TUFFING SVÄRTA

...rta thingiverse https://cad.onshape.com/documents/bcb6ac8c56ecdc920a728128/w/a2b306e32ea6f3c76fff35e9/e/d9367507a4aae69b6ad93560

Night lamp hook for IKEA Svärta loft bed by ndupont

Night lamp hook for IKEA Svärta loft bed by ndupont

...t bed by ndupont thingiverse night lamp hook for ikea svärta loft bed it requires a pair of m3x10mm hex screws and matching nuts

Headphone Hanger for IKEA SVÄRTA by Plastic_Isotope

Headphone Hanger for IKEA SVÄRTA by Plastic_Isotope

...ength if needed. no need for brim/raft, i put a 2mm brim just incase. it printed without support, but it does have a curve in it.

Pixel 2 XL Phone Holder for IKEA SVÄRTA by Plastic_Isotope

Pixel 2 XL Phone Holder for IKEA SVÄRTA by Plastic_Isotope

... hold smaller phones for sure, but if its too small, it will fall out. you are more than welcome to remix it fit your own phone.

IKEA Kura clip for IKEA Svärta loft bed by HCP

IKEA Kura clip for IKEA Svärta loft bed by HCP

...d bracket. you may need to use a 10mm drill bit to remove any over extrusion inside the hole, depending on your printers quality.

Minecraft Torch to Ikea Svärta Bedpost Bracket

Minecraft Torch to Ikea Svärta Bedpost Bracket

...t has a diameter of 38 mm. 4 m4 nuts, 4 m4 x 20mm or 25mm allen screws and 2 m4x 6mm countersunk screws are required for assembly

Anti vibration pads for IKEA Svärta loft bed by ndupont

Anti vibration pads for IKEA Svärta loft bed by ndupont

...ible as well (it has a flat top surface) if your flexible filament is not flexible enough, just insert it upside-down in the base

Search for 14 Svärta models

Ndupont

Mickey Mouse in dual extrusion by ndupont

Mickey Mouse in dual extrusion by ndupont

...mickey mouse in dual extrusion by ndupont thingiverse a dual extrusion version of this great model. cut with tinkercad.

Tevo Tarantula Stop / Reset button by ndupont

Tevo Tarantula Stop / Reset button by ndupont

...ple reset / stop button as it's always nice to be able to abort any operation wihtout the need of a tool to press the button.

V2 Rocket - dual extrusion by ndupont

V2 Rocket - dual extrusion by ndupont

...upports as the included ones are too thin for a 0.4mm nozzle. 3 perimeters (1.2mm) and a concentric infill make the print faster.

Night lamp hook for IKEA Svärta loft bed by ndupont

Night lamp hook for IKEA Svärta loft bed by ndupont

...t bed by ndupont thingiverse night lamp hook for ikea svärta loft bed it requires a pair of m3x10mm hex screws and matching nuts

Tevo Tarantula MKS cable strain relief by ndupont

Tevo Tarantula MKS cable strain relief by ndupont

...spired by the one by charles_snyder. this model will fit the original mks acrylic encasing without requiring any post print work.

Telescope collimation eyepiece by ndupont

Telescope collimation eyepiece by ndupont

...0, z=3mm time lapse : https://www.youtube.com/watch?v=2tser6o8x0e single extrustion : https://www.youtube.com/watch?v=hszm7j8w3b0

Telescope eyepiece / focuser cap (male cap) 1.25in / 2in by ndupont

Telescope eyepiece / focuser cap (male cap) 1.25in / 2in by ndupont

...by ndupont thingiverse male cap for 1.25in and 2in focusers/accessories time lapse : https://www.youtube.com/watch?v=jtayu7eeyse

Tevo Tarantula LCD cover / bezel by ndupont

Tevo Tarantula LCD cover / bezel by ndupont

...ne. it obviously has to be printed in dual extrusion. the matching reset button is here https://www.thingiverse.com/thing:2377397

T2 cap for telescope accessories by ndupont

T2 cap for telescope accessories by ndupont

... well. print them with a 0.2mm layer height (or finer), no supports brim or raft required t2 is a 42mm thread with a 0.75mm pitch

Tevo Tarantula MKS board offset bracket by ndupont

Tevo Tarantula MKS board offset bracket by ndupont

...ne lets you channel your cables through the opening. print a pair with a mirrored one, flat side on the bed, no support required.

Search for 72 Ndupont models

Loft

LOFT

...loft 3ddd лофт стул в стиле loft

Loft

...ft turbosquid royalty free 3d model loft for download as max on turbosquid: 3d models for games, architecture, videos. (1431498)

Loft light

...loft light 3ddd loft light

Loft concept - Loft Milky Light

Loft concept - Loft Milky Light

...milky light три вида small, medium, large сайт производителя -http://loft-concept.ru/  материалы corona render и v-ray

Loft lamp

...loft lamp 3dexport table loft lamp

LOFT Capitonne

...loft capitonne 3ddd wardrobe loft capitonne

IL Loft

...il loft 3ddd il loft мебель фирмs il loft стул- модель tim барная стойка-эксклюзивная модель

LOFT

... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.

Bellus Loft

...bellus loft 3ddd bellus , угловой диван loft фабрики bellus

loft

...loft 3dexport specularmap and a blank uv texture

Search for 14551 Loft models

Ikea

IKEA

...ikea 3ddd ikea , стеллаж ikea

IKEA

...ikea 3ddd ikea кухня ikea

IKEA

...ikea 3ddd ikea осторожно, тяжелая модель ikea

IKEA

...ikea 3ddd ikea 5 зеркал от ikea

IKEA

...ikea 3ddd ikea , бойа ikea светильник потолочный

IKEA

...ikea 3ddd ikea , барный bar stool ikea

IKEA

...ikea 3ddd ikea , зубная щетка , косметика ikea

IKEA

...ikea 3ddd ikea , трюмо дамский столик ikea.

IKEA

...3ddd ps , декоративный набор , ikea ikea decor

Ikea

...ikea 3ddd ikea , lagra модель лампы от ikea

Search for 34141 Ikea models

Bracket

archibase_planet

Bracket

...bracket archibase planet bracket corbel holder bracket 1 - 3d model (*.gsm+*.3ds) for interior 3d visualization.

archibase_planet

Bracket

...bracket archibase planet bracket corbel console bracket 5 - 3d model (*.gsm+*.3ds) for interior 3d visualization.

archibase_planet

Bracket

...bracket archibase planet corbel holder bracket bracket 6 - 3d model (*.gsm+*.3ds) for interior 3d visualization.

archibase_planet

Bracket

...bracket archibase planet bracket corbel console bracket 8 - 3d model (*.gsm+*.3ds) for interior 3d visualization.

archibase_planet

Bracket

...bracket archibase planet bracket corbel holder bracket n280911 - 3d model (*.gsm+*.3ds) for interior 3d visualization.

archibase_planet

Bracket

...bracket archibase planet holder corbel bracket bracket 9 - 3d model (*.gsm+*.3ds) for interior 3d visualization.

archibase_planet

Bracket

...bracket archibase planet corbel holder bracket bracket 10 - 3d model (*.gsm+*.3ds) for interior 3d visualization.

archibase_planet

Bracket

...bracket archibase planet corbel console bracket bracket 11 - 3d model (*.gsm+*.3ds) for interior 3d visualization.

archibase_planet

Bracket

...bracket archibase planet holder console bracket bracket 12 - 3d model (*.gsm+*.3ds) for interior 3d visualization.

archibase_planet

Bracket

...bracket archibase planet bracket corbel holder bracket 13 - 3d model (*.gsm+*.3ds) for interior 3d visualization.

Search for 39252 Bracket models

Bed

bed

...bed 3ddd bed , постельное белье bed

bed

...bed 3ddd bed , постельное белье bed

bed

...bed 3ddd bed , постельное белье bed

bed

...bed 3ddd bed , постельное белье bed

bed

...bed 3ddd bed , постельное белье bed

bed

...bed 3ddd bed , постельное белье bed

bed

...bed 3ddd bed , постельное белье bed

bed

...bed 3ddd bed , постельное белье bed

Bed

...bed 3ddd bed , постельное белье , постель bed

bed adairs bed

...rs bed 3dexport bed adairs bed in modern style. if you want a smoother surface, please turn on turbosmooth in the modifier list.

Search for 103121 Bed models

Wall

Wall and UDK Wall

Wall and UDK Wall

... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.

archibase_planet

Wall

...wall archibase planet batten wall plywood partition batten wall - 3d model for interior 3d visualization.

Wall

...wall 3docean low polgon wall low stone old wall stone wall 2048*2048 tex obj,fbx,blend format. low polygon. game ready.

wall

...wall 3ddd камень , кладка damaged stone wall

wall

...wall 3dexport room with a wall with doors made of wood and leather

WALL FREAMS

...wall freams 3ddd wall freams wall freams

WALL-E

...wall-e 3ddd wall-e , робот wall-e

WALL PANNEL

...wall pannel 3ddd панель wall pannel for enterance wall.

great wall-city wall-dianjiangtai

great wall-city wall-dianjiangtai

...great wall-city wall-dianjiangtai 3dexport great wall-city wall-dianjiangtai<br>3ds max 2015

Wall

...wall turbosquid royalty free 3d model wall for download as on turbosquid: 3d models for games, architecture, videos. (1522889)

Search for 164326 Wall models