Thingiverse
VSR10 Silencer Adapter(s) by KeiserZA
by Thingiverse
Last crawled date: 3 years, 1 month ago
Please note that this is for a few centemeters from the back to the front of the VSR10 only. If you would like to extend it beyond that point, i have added and additional plug that fits into the pipe. This can then be used as a spacer at the tip of the VSR barrel and at the tip end of the silencer... I did not add grubscrew holes as the spacers fit nice and tight onto the barrel itself
My design is for adapters to fit a 45mm PVC pipe over the existing barrel.
So the design is two attachments that fit inside the pvc pipe and over the barrel of the VSR/BAR10. Thus the length of the silencer is up to the customizer of the airsoft rifle.
The friction between the barrel and the spacer is adequate to keep the adapter on the VSR10
UPDATE: There are 40mm spacers (The size is in the name) and 45mm spacers (the files with no size description)
My design is for adapters to fit a 45mm PVC pipe over the existing barrel.
So the design is two attachments that fit inside the pvc pipe and over the barrel of the VSR/BAR10. Thus the length of the silencer is up to the customizer of the airsoft rifle.
The friction between the barrel and the spacer is adequate to keep the adapter on the VSR10
UPDATE: There are 40mm spacers (The size is in the name) and 45mm spacers (the files with no size description)
Similar models
thingiverse
free
VSR G-Spec barrel spacer by csakip
...pec. i have a bar-10 with modify barrel, it fits perfectly, but it should fit the marui one too. use the o-rings for aeg pistons.
thingiverse
free
Universal length suppressor (gel blaster) tips - 14mm CCW mount
... the hop-up / into the pvc.
designed from scratch, but inspired by superpoo's gel blaster customisable suppressor / silencer.
3dwarehouse
free
barrel spacer start vsr10
...barrel spacer start vsr10
3dwarehouse
pour replique vsr10
thingiverse
free
VSR10 BAR-10 Silencer Adapter Airsoft by SoundSlayers
... a diameter of 45 (wall thickness 1.5 mm)
it has elements for the front and an end with two stabilizers
may require minor sanding
cults
$83
LC Vsr10 Stock
...lc vsr10 stock
cults
airsoft gun vsr bar vsr10 bar10 stock sniper bolt rifle
original stock for vsr 10 / bar 10
thingiverse
free
Electromagnet PVC Adapter by ryansusername00
...omagnet.
the adapter was designed to be used with a m4x16mm screw (same as original model, the spacer used the same size screw).
thingiverse
free
4 inches Sewer Pipe to Buttress Plug Adapter for Rain Barrel by mmasson
...h a buttress plug (large thread) and mate with a 4" pvc fitting.
i use this to join my gutter downspouts to my rain barrels.
thingiverse
free
vsr-10 muzzle brake by adas1223
...ress fit muzzle brake for jg bar10/vsr10 (non- g model) print with tip up and supports
edit 10/11/18: added a -14mm brake version
thingiverse
free
VSR-R 3d printed parts by Reliku
... will also fit regular vsr's with a straight (g-spec style) barrel. i used to print these with .2 layer thickness at 80 mm/s.
grabcad
free
simple screen for 3" pipe
...t; id to fit over a 3" pipe such as pvc or abs.
i'm using as a gutter filter for rain water into a barrel for chickens
Vsr10
thingiverse
free
VSR10 catcher Well MB02 MB03 by galegorafa
...vsr10 catcher well mb02 mb03 by galegorafa
thingiverse
mag release for vsr10 with adjustments for well mb02 and mb03
thingiverse
free
VSR10 AAC nub tensioner
...oncave and flat.
those nubs will fit perfectly in the aac hopup unit.
tested with ml hopup.
printed with ender 3, pla, 0.12, 100%
thingiverse
free
Mobius VSR10 G-Spec Silencer clamp by Maxsce
...this object:
m5x35 imbus screw + washer + nut
and a kodak screw to fix the mobius
the "frontcam" files are the 3d files
thingiverse
free
VSR10 TMR hop up chamber lever (mb03 well) by Slovakboy
...with 0.2mm nozzle..
use brim 5mm or more..
if you have good calibrated printer holes fits good
after make please share..
enjoy :)
thingiverse
free
VSR10 BAR-10 Silencer Adapter Airsoft by SoundSlayers
... a diameter of 45 (wall thickness 1.5 mm)
it has elements for the front and an end with two stabilizers
may require minor sanding
thingiverse
free
VSR10 Bipod Rail by RileyEntropy
...ng swivel is threaded into the plastic stock and is a weak point. i would suggest replacing it with an m5x10 mm screw and m5 nut.
thingiverse
free
Maple leaf Omega nub for VSR10/BAR10 (for ML Buckings) by TangoKilo
...ngiverse
my nub broke, so i decided to prit one to see if it worked.
this was my first atempt at 3d design outside of minecraft.
thingiverse
free
Airsoft VSR10 To M4 Mag Adapter by enone
...sed 0.3mm for the adapter and 0.2mm for the release lever and spring. make sure there is no debris in the feed tube before using.
thingiverse
free
VSR10 flush magazine assist by adas1223
...ter grip.
keeps your mags getting accidently bumped out.
edit 1/20/2019 i cleaned up the hard edges also also separated the stls
Keiserza
thingiverse
free
SWOTSCOPE by KeiserZA
...iverse
my version of a swotscope
takes 20mmx20mm mirrors
assemble according to the provided images
2 extender arms are required.
thingiverse
free
Scope Level by KeiserZA
...scope level by keiserza
thingiverse
25mm scope level with bubble level space of 10mm by 6mm.
crude design
thingiverse
free
Spool stand by KeiserZA
...pool stand by keiserza
thingiverse
spool stand for the spool holder in the remix (a desktop version of an excellent frame stand)
thingiverse
free
Elongated Picatinny Rail by KeiserZA
...
thingiverse
i have remixed the picatinny form the original file, to elongate it to 13.5cm and added a extra hole in the middle.
thingiverse
free
Handheld Periscope by KeiserZA
...nto the two gaps. it can be glued together as one piece or use the slide center piece as an extension to increase height.
enjoy.
thingiverse
free
Dominion Praetor Solid by KeiserZA
... the praetor. so i just spliced the 2 together.
original split version can be found here http://www.thingiverse.com/thing:1375645
thingiverse
free
G18C Comp remix to Silencer by KeiserZA
... of the original g18c compensator. i wanted a round silencer that fits onto my tm g18c, that can attach onto the picatinny rail.
thingiverse
free
Curtain Wall Mount 20mm by KeiserZA
...rse
20mm curtain wall mount
m4 hole for wall mount
second version i added an additional hole for the screw driver to fit through
thingiverse
free
Picatinny iron Sights Airsoft by KeiserZA
...ht, so i made a few variants.
it is untried and untested.
the lables on the first image correspond to the stl for that sight only
thingiverse
free
Potato grip Airsoft (and other) by KeiserZA
...nt, share and if you like tip.
i printed it using abs on normal abs settings
works for me, hope it works for someone else as well
Silencer
turbosquid
$5
Silencer
...alty free 3d model silencer for download as 3ds, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1288625)
turbosquid
$45
silencer
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Silencer
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Silencer
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
silencer
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
Silencer 3D Model
...silencer 3d model
3dexport
silencer
silencer 3d model sargent99 63624 3dexport
3d_export
$10
Silencer 3D Model
...ssault rifle sniper machine gatling gun pistol handgun weapon game ready gameready
silencer 3d model martialartist 22621 3dexport
turbosquid
$5
Silenced Revolver
...e 3d model silenced revolver for download as ma, max, and fbx on turbosquid: 3d models for games, architecture, videos. (1355044)
turbosquid
$9
Silencer V5
...3d model silencer v5 for download as blend, obj, dae, and fbx on turbosquid: 3d models for games, architecture, videos. (1711483)
turbosquid
$9
silencer v4
...3d model silencer v4 for download as blend, dae, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1711410)
Adapter
3d_export
$10
Adapter 3D Model
...adapter 3d model
3dexport
adapter
adapter 3d model mur 20260 3dexport
archive3d
free
Adapter socket 3D Model
...dapter socket adapter
adapter socket n090211 - 3d model (*.3ds) for interior 3d visualization.
turbosquid
$400
cell adaptation
...
royalty free 3d model cell adaptation for download as blend on turbosquid: 3d models for games, architecture, videos. (1701655)
archive3d
free
Adapter 3D Model
...ups pc equipment
adapter extron n180813 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
turbosquid
$5
usb adapter
...royalty free 3d model usb adapter for download as ige and stl on turbosquid: 3d models for games, architecture, videos. (1582234)
turbosquid
$15
Power adapter
...free 3d model power adapter for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1510024)
turbosquid
$8
USB adapter
...e 3d model usb adapter for download as max, fbx, obj, and dwg on turbosquid: 3d models for games, architecture, videos. (1713542)
turbosquid
$30
adapter.3ds
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
Nokia Adapter
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
Universal adapter
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.