Thingiverse
VR stock "the Talon" lightweight/simple by Austinswill
by Thingiverse
Last crawled date: 3 years, 1 month ago
A custom lightweight stock for VR FPS games. (I used it for Onward and Stand out and it works great)
Print the following:
1 Butt
2 Base blocks
2 Latches
2 guide rails
1 Tube end
1 drill guide (used to make even marks on tube for drilling retention holes, you do not have to print the entire thing, you can print only half of it but I suggest at least 3 holes)
You will also need to find some grips on Thingiverse for whatever type of controller you have. There are plenty out there. Just be sure that the bottom is FLAT so that you can glue it to the base blocks.
You will need the following items to complete the stock:
2 springs (sold in packs https://www.amazon.com/gp/product/B06XPG813G/ref=oh_aui_detailpage_o05_s01?ie=UTF8&psc=1
24 inch aluminum or CF tube 1" outer diameter. I bought this and cut it. You can make this as long as you would like, just print out an extra guide rail if you are really tall. If you go with a 2 foot tube, you can make 3 stocks with this https://www.amazon.com/gp/product/B005IZ37HU/ref=oh_aui_bia_detailpage_o03_s00?ie=UTF8&psc=1
Two of these
https://www.lowes.com/pd/Hillman-8-x-0-75-in-Flat-Head-Aluminum-Standard-Phillips-Drive-Interior-Exterior-Standard-SAE-Binding-Post-Screw/3012651
and 2 of these
https://www.lowes.com/pd/Hillman-8-x-1-5-in-Flat-Head-Aluminum-Standard-Phillips-Drive-Interior-Exterior-Standard-SAE-Binding-Post-Screw/3702838
assembly is fairly strait forward.
Push the butt onto the aluminum tube and drill through the two holes. Install the long threaded post to hold butt on. You may have to lightly sand the hole in the butt to accommodate your tube, alternatively you can sand the tube. Go slowly as a tight fit is preferred.
Glue the two guide rails together with super glue. Once dry lay the flat side on a table and put super glue in the trough that faces upwards. Then put the rail guide nipple into the recess in the butt and push the tube down onto the guide rails. Doing this with the guide rails flat on the table ensures the guide rails glue to the tube strait. You can put a lot of pressure on the tube to get a good bond.
Now trim the excess Guide rail off the end of the tube, make it flush and neat looking.
Use the Drill guide by putting it over the tube. Use a punch in each hole on what will be the bottom of the tube, then move the guide and repeat. This will give evenly spaced holes. I didnt do the entire length of the tube, but you certainly can if you want more adjustment points. Once all the holes are marked drill them out with a 1/4 inch drill bit. Best if you have a drill press but not necessary if you used a good center punch.
Now take the base block and latches and drill out their holes to the same size as the threaded post. Put a spring in the top hole of the latch. Put the latch in place and put the shorter threaded post through the holes and tighten.
Finally, glue your grips to the base blocks. Lightly sand the areas that will come in contact before you glue. I used gorilla super glue and it makes an extremely strong bond with PLA. If you print in ABS I do not know what would be best.
Slide the base block onto the tube and You are all set!
Print the following:
1 Butt
2 Base blocks
2 Latches
2 guide rails
1 Tube end
1 drill guide (used to make even marks on tube for drilling retention holes, you do not have to print the entire thing, you can print only half of it but I suggest at least 3 holes)
You will also need to find some grips on Thingiverse for whatever type of controller you have. There are plenty out there. Just be sure that the bottom is FLAT so that you can glue it to the base blocks.
You will need the following items to complete the stock:
2 springs (sold in packs https://www.amazon.com/gp/product/B06XPG813G/ref=oh_aui_detailpage_o05_s01?ie=UTF8&psc=1
24 inch aluminum or CF tube 1" outer diameter. I bought this and cut it. You can make this as long as you would like, just print out an extra guide rail if you are really tall. If you go with a 2 foot tube, you can make 3 stocks with this https://www.amazon.com/gp/product/B005IZ37HU/ref=oh_aui_bia_detailpage_o03_s00?ie=UTF8&psc=1
Two of these
https://www.lowes.com/pd/Hillman-8-x-0-75-in-Flat-Head-Aluminum-Standard-Phillips-Drive-Interior-Exterior-Standard-SAE-Binding-Post-Screw/3012651
and 2 of these
https://www.lowes.com/pd/Hillman-8-x-1-5-in-Flat-Head-Aluminum-Standard-Phillips-Drive-Interior-Exterior-Standard-SAE-Binding-Post-Screw/3702838
assembly is fairly strait forward.
Push the butt onto the aluminum tube and drill through the two holes. Install the long threaded post to hold butt on. You may have to lightly sand the hole in the butt to accommodate your tube, alternatively you can sand the tube. Go slowly as a tight fit is preferred.
Glue the two guide rails together with super glue. Once dry lay the flat side on a table and put super glue in the trough that faces upwards. Then put the rail guide nipple into the recess in the butt and push the tube down onto the guide rails. Doing this with the guide rails flat on the table ensures the guide rails glue to the tube strait. You can put a lot of pressure on the tube to get a good bond.
Now trim the excess Guide rail off the end of the tube, make it flush and neat looking.
Use the Drill guide by putting it over the tube. Use a punch in each hole on what will be the bottom of the tube, then move the guide and repeat. This will give evenly spaced holes. I didnt do the entire length of the tube, but you certainly can if you want more adjustment points. Once all the holes are marked drill them out with a 1/4 inch drill bit. Best if you have a drill press but not necessary if you used a good center punch.
Now take the base block and latches and drill out their holes to the same size as the threaded post. Put a spring in the top hole of the latch. Put the latch in place and put the shorter threaded post through the holes and tighten.
Finally, glue your grips to the base blocks. Lightly sand the areas that will come in contact before you glue. I used gorilla super glue and it makes an extremely strong bond with PLA. If you print in ABS I do not know what would be best.
Slide the base block onto the tube and You are all set!
Similar models
grabcad
free
Drill jig:1(latch type)
...drill jig:1(latch type)
grabcad
used to guide the drilling tool to make holes exactly
thingiverse
free
Robo3d Latches for Mikes enclosure by Leed3
...up against the plastic and drill 1 hole. then put a screw through that hole to hold the jig in place. then drill the second hole.
thingiverse
free
Hole making jig for 1 1/4 PVC
... 2 sets of holes are spaced 1" apart. i used this as a guide for drilling the holes with a drill press and a 5/32" bit.
thingiverse
free
25 mm square aluminium tube drill guide by alisonleanne
...r and supports on the other corners. 27dec12: improved corner support, can use the same square plug as end stops.old one removed
thingiverse
free
Talon Claw Stock Tube/butt adapter by electricAGENT
...it out, feel free to comment and ask questions! the step files will also be uploaded so you can change it to your liking. cheers!
thingiverse
free
Ender 4 carriage template by PDTRob
...minum trace and then drill and cut out. i used 3 iverntech mgn12 300mm linear rail guide with mgn12h carriage block to complete.
thingiverse
free
1.5" Tube Drill Guide
...1/2-20 tap, to accept a thread-in drill guide/bushing. simply run a tap thru the print, and screw in the bushing of your choice.
thingiverse
free
Rotary Sander Attachment for Drill by raspberrypi33
...flat part (glue dots work very well). plug it into your drill, and you have a sander! please post a picture if you have made one!
thingiverse
free
IKEA closet enclosure filament hole Ver.1 by Jungleboy77
...r the drill hole.
1.drill the hole with the 35mm tool (ikea article number: 203.023.32))
2.print it out this *.stl
3.mount it
:-)
thingiverse
free
Brio Train Track hole guide
...ge sided has the extra large hole for a metal tube insert and the brio train track guide 2 single sided has the smaller 1/4 hole.
Talon
turbosquid
$8
Talon Knife
...y free 3d model talon knife for download as obj, ipt, and iam on turbosquid: 3d models for games, architecture, videos. (1348946)
turbosquid
$4
Spire of Talons
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$17
Northrop T-38 Talon
...northrop t-38 talon
3dexport
northrop t-38 talon
3d_export
free
1998 Eagle Talon TSi Turbo
...1998 eagle talon tsi turbo
3dexport
1998 eagle talon tsi turbo
turbosquid
$15
HS-12 Talon
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$110
Stealth Talon 3D Model
...force lightning raptorrocket gun offensive counter us homeland security concept
stealth talon 3d model rendersteel 72513 3dexport
3d_export
$10
Talon Sword 3D Model
...del
3dexport
sword melee game model low poly video fantasy rpg warrior blade mmo
talon sword 3d model project_zero 32037 3dexport
turbosquid
free
ME3 talon t7 heavy pistol
...l me3 talon t7 heavy pistol for download as obj, fbx, and dae on turbosquid: 3d models for games, architecture, videos. (1402804)
3d_export
$20
eagle talon tsi turbo
...s.<br>car textures:png - 2k resolution other available formats: obj, 3ds, fbx, stl, max. polycount: 34484 poly / 30158 tris
3d_export
$10
Eagle 3D Emblem 3D Model
...3d emblem 3d model 3dexport 3d logo eagle emblem talon car eagle 3d emblem 3d model gdesigns 36617...
Lightweight
design_connected
$11
Lightweight
...lightweight
designconnected
foscarini lightweight pendant lights computer generated 3d model. designed by tom dixon.
turbosquid
$15
Lightweight
...y free 3d model lightweight for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1361264)
turbosquid
$2
Lightweight Shield
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$12
Lightweight Toy Armor
... model lightweight toy armor for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1386364)
turbosquid
$29
Lightweight Pine Chair
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Lightweight Task Chair
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Chandelier Lightweight Foscarini
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
futuristic lightweight wheel
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
free
Lightweight structure system animated
...lightweight structure system animated
3dexport
https://www.dock4all.com/
turbosquid
$15
03 LIGHTWEIGHT PATTERN WALL
...ghtweight pattern wall for download as 3ds, max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1504846)
Stock
turbosquid
$19
Stocks
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$7
Christmas Stockings
...christmas stockings
3docean
christmas gift holiday present sock stocking
sock and 2 gift.
turbosquid
$30
Christmas Stocking
...
royalty free 3d model christmas stocking for download as fbx on turbosquid: 3d models for games, architecture, videos. (1660476)
turbosquid
$2
sexy stockings
...uid
royalty free 3d model sexy stockings for download as max on turbosquid: 3d models for games, architecture, videos. (1350546)
turbosquid
$2
sexy stockings
...uid
royalty free 3d model sexy stockings for download as max on turbosquid: 3d models for games, architecture, videos. (1354968)
turbosquid
$2
sexy stockings
...uid
royalty free 3d model sexy stockings for download as max on turbosquid: 3d models for games, architecture, videos. (1351029)
turbosquid
$3
Iron Stocks
...yalty free 3d model iron stocks for download as blend and obj on turbosquid: 3d models for games, architecture, videos. (1596546)
turbosquid
$6
Prison Stocks
...free 3d model prison stocks for download as obj, c4d, and fbx on turbosquid: 3d models for games, architecture, videos. (1454023)
turbosquid
$29
Christmas Stocking
...del christmas stocking for download as 3ds, obj, c4d, and fbx on turbosquid: 3d models for games, architecture, videos. (1344671)
turbosquid
$5
Medieval Stocks
... model medieval stocks for download as 3ds, obj, c4d, and fbx on turbosquid: 3d models for games, architecture, videos. (1291222)
Simple
turbosquid
$1
Simple goblet (Taca simples)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
simple bench
...simple bench
3dexport
the simple bench which can be used in simple projects or video-games.
3d_export
$5
simple knob
...simple knob
3dexport
simple knob
3d_export
$5
simple handle
...simple handle
3dexport
simple handle
3d_export
$5
simple button
...simple button
3dexport
simple button
3d_export
$5
simple spindle
...simple spindle
3dexport
simple spindle
3d_export
$5
simple wheel
...simple wheel
3dexport
simple wheel
3d_export
$5
simple chair
...simple chair
3dexport
simple blue chair
3d_export
free
Simple room
...simple room
3dexport
here is a simple but beautiful room
3ddd
free
SIMPLE | Кресло
...io cianfarra , simple
производитель area declic дизайн giulio cianfarra коллекция simple