Thingiverse
VoronoiSquircle2
by Thingiverse
Last crawled date: 4 years, 4 months ago
This is a modification to https://www.thingiverse.com/thing:4116382; I tweaked the squircle geometry into a pure circle and changed the overall shape to be more symmetrical. Doing this was quite easy because all my designs are 100% parametric. This means that changing geometry requires just changing some numbers; this blog page shows the benefit of parametric software: http://birkbinnard.com/blog/parametric-modeling/.
This part printed in 20 1/2 hours using a print speed of 80 mm/sec and a layer height of 0.200 mm.
This part printed in 20 1/2 hours using a print speed of 80 mm/sec and a layer height of 0.200 mm.
Similar models
thingiverse
free
WaterfallDish2 by bbinnard
...//youtu.be/jwlpvb3jb_4. this part printed in just over 29 hours using a layer height of 0.200 mm and a print speed of 100 mm/sec.
thingiverse
free
FacetedVase2 by bbinnard
...log/parametric-modeling/
this part printed in 10 hours 48 min. using a layer height of 0.200 mm and a print speed of 100 mm./sec.
cults
free
Faceted Vase 2
...g/parametric-modeling/
this part printed in 10 hours 48 min. using a layer height of 0.200 mm and a print speed of 100 mm./sec.
thingiverse
free
Slatvase7 by bbinnard
...https://youtu.be/r4xj_6zf5ve.
this part printed in 29 3/4 hours using a layer height of 0.200 mm and a print speed of 100 mm/sec.
thingiverse
free
SquircleBowl3 by bbinnard
.../blog/parametric-modeling/.
this part printed in 9 hrs. 20 min. using a layer height of 0,200 mm and a print speed of 100 mm/sec.
thingiverse
free
Minimal1
...ps://youtu.be/sjqkrij8-bo.
minimal1 printed in 7 hrs. 52 minutes using a print speed of 80 mm/sec and a layer height of 0.200 mm.
thingiverse
free
QuadrupleTwistVase1 by bbinnard
...log/the-quadruple-twist/. the actual print took just over 23 hours at a layer height of 0.200 mm and a print speed of 100 mm/sec.
cults
free
QuadrupleTwistVase1
...og/the-quadruple-twist/. the actual print took just over 23 hours at a layer height of 0.200 mm and a print speed of 100 mm/sec.
grabcad
free
parametric | art :: flow lampshade for 3D printing
...check out my blog:
http://parametric-art.com
and you can find my 3d printed projects here as well:
http://3dprinted.tumblr.com
thingiverse
free
winter collection_3d printed voronoi bracelet by andreashepherd
...tp://parametric-art.com/
resolution: standard
with support and without raft
infill: 10%
number of shells: 2
layer height: 0,20 mm