Voron Afterburner Bowden Mount Bl Touch Ender 3 by tzeman

Last crawled date: 3 years, 1 month ago

Mount for bowden version of Voron Afterburner for Creality Ender 3/CR printers with cable attachment.
Removed unnecessary material to save some weight and material
If you need other modification, just write me, but step file is included
UPDATE v2.1:
added holes for mounting accelerometer
changed position of cable attachment in hole on the back from top to bottom
UPDATE V2.2:
asymmetric cable attachment holes
fixed hole
SETTINGS
Probe X offset from nozzle: +39mm
Probe Y offset from nozzle: +8mm
KLIPPER (essential)
[bltouch]
x_offset: 39
y_offset: 8
[bed_mesh]
mesh_min: 23,6 # i have very thin clips on my bed ... if you have bigger just add 1-5mm to second value
mesh_max: 230,226 # if you have bigger clips than me :-) just subtract 1-5mm from second value
[stepper_x]
position_min: -16
position_endstop: -16
[stepper_y]
position_min: -15
position_endstop: -15
Notes
Think twice before choosing direct drive with single z-axis unless you need to print flexible filament. With latest versions of klipper pressure advance works fine with bowden setup and also with stock creality melzi 1.5 (tmc2208 in legacy mode) even though SKR (mini, 1.3. etc) should be preffered (and cheaper) choice
Take care when wiring heater cables to make space for BL touch (still not in ideal position)
Print with support otherwise follow voron manual print settings (minimal settings are ok for afterburner to save some weight)
Screws ...use BHSC (button head) on left side and fully screw down to hide them (5/6mm)
I will add klipper profile later
for accelerometer attachment you can use BHSC 6 or 8mm screws
Remixed:
(sorry, remix picker/searcher doesn't work, will try it later)
https://www.thingiverse.com/thing:4614384https://www.thingiverse.com/thing:4638150 (use bl touch mount and probe offset from here)