Voopoo Drag Max Case by Lukripar

Last crawled date: 2 years, 11 months ago

This is a case for the Voopoo drag max. This was created because after a few months, the poorly implemented door for the battery compartment pops open super easily after wearing in and batteries get lost in my pocket and I randomly lose my batteries when handling it now.
This solves that issue by creating a slim fit case that fits snugly around the device, protecting it from scuffs as well as preventing that battery door from opening on its own.
When putting the case on, be sure to do it slowly while the device is powered off, pressing down the buttons as they make contact with the crossbar on the front of the case and letting them slide through. Press down until you hear the device "click" into place. Access to all of the device's functions are preserved, and you don't even need to take it out to charge it if you use the usb c port to charge.
Enjoy!
See Print settings for information on what supports to use. It is super easy to set up and cleanly popped off when taking the print from the plate.