Voodoo System - Customizable Mocap, Simple Construction by robotgeek

Last crawled date: 4 years, 7 months ago

The Voodoo System is a simple arduino based method to control servos in a direct way with RobotGeek Rotation Knobs, Buttons, and FSR, and can be laid out to match any robot you've built! You'll need 20mm and 10mm long M3 Bolts to build it. Bolts will thread into the plastic. Shown as an example is the layout for controlling a RobotGeek Snapper Arm. You can follow through some lessons using the code HERE.