Thingiverse
Volantex Phoenix S FPV Camera mount on vertical stabilizer
by Thingiverse
Last crawled date: 5 years, 4 months ago
Designed this part to mount my Caddx Turbo Micro F2 FPV cam on the vertical stabilizer.
Attached the metal Caddx bracket with a small screw to this bracket. This principle should apply to any mini/micro FPV cam to be mounted using this bracket.
Next I put the bracket on the leading edge of the vertical stabilizer. Secured it with tape. The wire towards the FPV cam is kept in place at the leading edge with electrical isolation tape (el cheapo). Drilled a small hole in the fuselage where the vertical stabilizer meets the fuselage. Allows me to run the cam wire through the fuselage towards the front of the plane where I have installed a Matek F411 Wing FCC.
I have printed it with the long sides flat on the bed. With letter M horizontal.
The M sized version fits my Phoenix S and Phoenix 2400. The L version my Volantex ASW28 V2 and the S version my old Phoenix 1600.
Attached the metal Caddx bracket with a small screw to this bracket. This principle should apply to any mini/micro FPV cam to be mounted using this bracket.
Next I put the bracket on the leading edge of the vertical stabilizer. Secured it with tape. The wire towards the FPV cam is kept in place at the leading edge with electrical isolation tape (el cheapo). Drilled a small hole in the fuselage where the vertical stabilizer meets the fuselage. Allows me to run the cam wire through the fuselage towards the front of the plane where I have installed a Matek F411 Wing FCC.
I have printed it with the long sides flat on the bed. With letter M horizontal.
The M sized version fits my Phoenix S and Phoenix 2400. The L version my Volantex ASW28 V2 and the S version my old Phoenix 1600.