Thingiverse
Voigtlander Vitessa Lenshood by titrisol
by Thingiverse
Last crawled date: 3 years, 4 months ago
Voigtlander Vitessa is a very cool camera, the original hood was the 125/20 which is a push-on external hood. Those are hard to find and expensive.
My Vitessa N with Color Skopar 3.5 has a OD of 34.5mm and ID of 33.0mm.
This dimensions have also been confirmed for the Ultron 2.0 lens in the Vitessa A series and the Skopar 2.8 in the latest series.
This is a remix of https://www.thingiverse.com/thing:1168491/ and https://www.thingiverse.com/thing:39683
R1 has 2 versions, one for mounting outside the lens (external) and one to mount inside the lens (internal)
R2 is a modification of the previous, only for external mout, with thicker wall and larger rectangular hood plus a hole for a cord/lanyard so you don't lose it.
I printed these in PLA, adjust your scale for shrinking is using a different filament.
My Vitessa N with Color Skopar 3.5 has a OD of 34.5mm and ID of 33.0mm.
This dimensions have also been confirmed for the Ultron 2.0 lens in the Vitessa A series and the Skopar 2.8 in the latest series.
This is a remix of https://www.thingiverse.com/thing:1168491/ and https://www.thingiverse.com/thing:39683
R1 has 2 versions, one for mounting outside the lens (external) and one to mount inside the lens (internal)
R2 is a modification of the previous, only for external mout, with thicker wall and larger rectangular hood plus a hole for a cord/lanyard so you don't lose it.
I printed these in PLA, adjust your scale for shrinking is using a different filament.
Similar models
thingiverse
free
Square Lens hood (Customized type) & 100*100mm Square filter holder by DoNotLeaN
...com/thing:4232850
due to the hood structure, vignetting may occur when mounted on a wide-angle lens. optimized for normal lenses.
thingiverse
free
Canon 24mm STM Lens Hood and cap by 3DMentes
...ing:587750 and http://www.thingiverse.com/thing:94534 i have create this one to use with 24mm stm lens.
looks good and do the job
thingiverse
free
voigtlander ultron 35mm F1.7 lens hood by kdsoo
...ll.
the demo product is made in transparent orange color but i recommend you to use black filament to prevent light interference.
thingiverse
free
Rolleiflex SL35x / Voigtlander VSL lens back cap by dmb56
...ap to fit lenses using rollei qbm mount such as rolleiflex sl35 , sl35e etc as well as voigtlander 35mm slrs using the same mount
thingiverse
free
Nikon F-Mount Lens to M42 Camera Body Adaptor by sechen
...uot; (https://www.thingiverse.com/thing:3101118) to create a "cheap" telescope using components that were lying around.
thingiverse
free
Camera Lens-Hood SMILE attachment for 18-55 IS STM by djonsnel
...g:443442
it is designed to fit the new canon 18-55 is stm since these have a different hood mount (2 contact strips instead of 3)
thingiverse
free
Parameterized flanged lens hood by Glyn
...he base to lock the hood in place.
this is the fitting for my olympus 75-300mm zoom lens, other makes probably use the same size.
thingiverse
free
Sony HDR Lens Hood & Cap by Macrony
...with other models.
the long model (v2) is better and does not produce vignetting.
the cap may need to be sanded to fit perfectly.
thingiverse
free
GoPro Hero 3 Mount with Lens Hood by Revamped_Outdoors
...omplicated file which seems to be way to large for the size of the work piece, but i will try to print as is and see how it goes.
thingiverse
free
Insta360 Go Cover with Lens Protector and Small Mount by rodrigo_sclosa
...ing:4496361 to use small mount to use with the toothpick picklepod2 insta360 holder (https://www.thingiverse.com/thing:3944156).
Titrisol
thingiverse
free
PenButler Remix by titrisol
...728
added some extra material at the cantilever for added strength (using meshmixer)
it prints well as one piece without supports
thingiverse
free
Soldier 76 facemask by Godspeeeeed
...facemask by godspeeeeed thingiverse this is a remix from titrisol on the soldier 76 face...
thingiverse
free
Soldier 76 mask by titrisol
... godspeeeed has make a fantastic work on this mask and his should be used instead of minehttp://www.thingiverse.com/thing:1919258
thingiverse
free
G-Clef cookie cutter by titrisol
... to the cut in the different sections, also i adjusted the thickness of the cutter to be >1mm which should make it more sturdy
thingiverse
free
RapideLite 200 ZStop Adjuster by titrisol
...zstop adjuster by titrisol
thingiverse
remixed in freecad to accomodate a thicker stem micrometer (12.6mm)
freecad file included
thingiverse
free
Contax/Kiev external to M42 Adapter by titrisol
...
it's easy to print with the tabs on the printer table; no supports needed
you might have to sand the tabs to match your lens
Voigtlander
thingiverse
free
Konica Hexanon 45mm f1.8/1.6 M25 to Leica-M by Nick9128
...ready to be mounted on techart pro af adapter, voigtlander close focusing or any chinese copy. this will not...
thingiverse
free
Voigtlander 15mm SWH pano mask by DCogsdell87
...voigtlander 15mm swh pano mask by dcogsdell87
thingiverse
just a simple mask for a 15mm swh viewfinder
thingiverse
free
M39 Lens to M42 Camera/Enlarger adaptor by dunga
...i've tested it and it works with an m39 voigtlander lens and an m42 lens mount cover. the gcode...
thingiverse
free
Fujifilm X-Pro1 19mm Diopter Holder by beekeg
...fujifilm x-pro1. this may also fit some nikon and voigtlander cameras, but i have not tested it on anything...
thingiverse
free
Voigtlander 15mm Viewfinder Cap by bostwickenator
...voigtlander 15mm viewfinder cap by bostwickenator
thingiverse
cap for the voigtlander 15mm viewfinder.
thingiverse
free
Voigtlander Nokton 35mm f1.4 Classic - tool to disassemble
...okton 35mm f1.4 lens.
basically is the tool used in this video, but with better grip:
https://www.youtube.com/watch?v=4xb2azbn7eo
thingiverse
free
Voigtlander Heliar 15/4.5 mk1 distance ring by asche81
...n. without it, my voigtlander heliar 15/4.5 mk1 infinity focus is at 1m on distance scale. used with sony a7 mk2, works excellent
thingiverse
free
Voigtlander Heliar 15/4.5 mk1 67mm filter adapter by asche81
...be printed or painted black.
for covering 100% fov adapter please look at 77mm version: https://www.thingiverse.com/thing:2756270
thingiverse
free
Front cap for Voigtlander Camera DKL by gotzon555
...front cap for voigtlander camera dkl by gotzon555
thingiverse
front cap for voigtlander camera with dkl mount.
Lenshood
thingiverse
free
lenshood for fuji xf 56 f1.2 / 23 f1.4 by ilovechaos
... i like, so i designed my own.
fits for 56mm f1.2 and 23mm f1.4
even fits with a filter (b+w xs pro)
printed in pla, 100% infill.
thingiverse
free
Lens Filter Adaptor Pentax FA* 300 for Haida square filter holder 100mm
...this adapter fits on a pentax fa* 300 f4.5 lenshood i do share other adaptors for different diameters -...
thingiverse
free
Lenshood Sony 24-105
...lenshood sony 24-105
thingiverse
for sony 24-105 lens.need to localy add support.
printed in petg, layer 0.2mm.
thingiverse
free
Lenscap for Panasonic Leica Summilux 15mm 1.7
...for the panasonic leica 15mm 1.7 lens with the lenshood attached. the original lenscap is nice, but the hooks...
thingiverse
free
Canon RF 50mm F1.8 Lens Hood by abewong000
...by abewong000 thingiverse didn't feel like paying for a lenshood and wasn't sure if there was a different between...
thingiverse
free
!BETTER FIT! DJI Mavic Pro - Lens Hood & Gimbal Guard(Sunshade/Anti Glare/Anti Flare) by neffson
...neffson thingiverse this is a dji mavic pro (platinum) lenshood designed by me to fit better. other designs on...
thingiverse
free
Fuji cap for XF-LH23 lenshood for the XF23 by thexperiments
...the overhang a little bit depending on your printer.
this can be a replacement for the original one or a base for bokeh stencils.
thingiverse
free
Lenshood for Sony DT 3.5-5.6/18-55 SAM II Sony a-mount lens by Toprob
... a tight fit.
note: i made the angle a little more steeper after i printed the part. so the hood from the stl is a little slimmer
thingiverse
free
ThiEye T5e Frame Case and Lens Hood by kamuro
...the forces of nature. the framcease together with the lenshood plate are wedging the camera in between so it...