Vivo Monitor stand VESA clamp by 1bigpig

Last crawled date: 3 years ago

I was asked to make a VESA bracket clamp for a VIVO 3 computer monitor stand. The clamp is designed to fit the VIVO tube or any 35mm diameter tube and provide 4 VESA mounting holes. The original use was to hold small computers, but if you wanted to hold a large monitor or heavy object, I would print out 2 clamps.
They are designed for SAE (Imperial) bolts, but metric bolts will also work.
The two clamp bolts are 1/4-20 x 1-1/2 length plus 2 nuts.
For the VESA holes I used two #8-32 x 1 length plus 2 nuts.
You can also use 6mm x 40mm bolts and nuts for the clamp and 4mm x 25mm bolts and nuts for the VESA mount.