VIVIMAGE Explore 2 Mini WiFi Projector Ceiling Mount by Coffeemade

Last crawled date: 3 years, 5 months ago

My wife spends lots of time cutting down trees, taping them together to then cut out patterns for sewing and came across this Facebook group, which helped me determine the Vivimage Expolore 2 would work.
Our cutting situation was 63" from ceiling to cutting table.
Using this mount:
-projector lens to cutting table was 55"
-leaving a 1-1/4" gap between projector and ceiling for exhaust vent to still function normally.
I used a 1/4" - 20 bolt to attach the mount to bolt, I will update with the proper length once I acquire one as I used a bolt laying around and printed spacer I had, but likely bolt size is 1.5-2"
Projector for Sewing Facebook group:https://www.facebook.com/groups/ProjectorsForSewing
VIVIMAGE Explore 2 Mini WiFi Projector used to accomplish this task. Calibration files are in the Facebook group.https://amzn.to/38PBbQM
Good luck and can be printed in PLA, I only printed in PETG because that is what was loaded in the printer.