Vise with Metal Support by gigl

Last crawled date: 3 years, 1 month ago

I did like the orginal Vise from "The Goofy" very much, but I could not print the Threads good enough. The Nut would not insert into the Rod.
This is why I had some Metal Parts included instead. Now it works like a charm
Parts
2 M12 Nuts
2 M12 Rod with 102 mm of length
2 Main Gears(2)
1 Sliding Jaw(2)
The Remaining parts from the original Vise: http://www.thingiverse.com/thing:2064269
Instructions
Print the Parts
Cut the Threads
Form a nice Thread into the new Sliding Jaw. Make sure to get a perfect 90deg angle
( I used a Drill rig)
Glue and insert the Rods into the Sliding Jaw
Insert the Nuts into Main Gear
Assemble rest of the Vise from the original instructions.
Happy Tooling!