VGA connector for iPhone charger by IonutF

Last crawled date: 4 years ago

I have made a model remix from my original VGA connector for USB charger.
I have done some aditional changes too.
The Knob is designed to imitate a loose screw with the broken thread. Always rotating, but no actual screwing.
I have set the gap between each piece randing from 0.1mm to 0.2mm.
Recommended printing settings:
0,1mm or less, for better results.
I have posted a picture with my recommended printing settings, but feel free to experiment yourself.
If you can, use a flexy material for the flexy side of the adapter, for nicer results. Though, plastic will also have some flexibility, due to the original design.
For printed version, please reffer to the original version of this remix.
Print the Body and the Knob twice for the entire product to be completed.
Other than that, happy tinkering, if you feel like there is more to this design, feel free to remix it.
Considering this is not my main job, I will try my best to create more of these adaptors.
For feedback and suggestions, either PM or use the comment section to do so.
Cheers,