VEX Robotics License Plate Holder

Last crawled date: 4 years, 3 months ago

This license plate holder is designed to fully cover the VEX Robotics competition requirements and team needs. When you put both license plates (red and blue) in your robot, it's mandatory that only one color (your alliance color) is visible. There are three outer shells designs. The first one is to be mounted with two (2) stand-offs coming vertically. Ideally, it it is attached from the robot's base. The second design requires two (2) stand-offs put horizontally. It was made with the idea of attaching it from the robot's tower (where the lift starts). Lastly, the third one is designed to be attached from a corner. The sliding plate holder is compatible with all three layouts. The goal of this 3D-printed design was to use as less hardware as possible, to limit the chances of plates falling around during matches, and most importantly, to reduce the amount of things that team's have to worry about.