Vespa Keychain 95MM Wide by DaveTea

Last crawled date: 4 years, 7 months ago

A friend wanted me to print the original one of these but it was tiny and needed some mesh tweaking to print well on my printer. I resized it to about 95MM wide and cut the height down. I also rotated it so the face of the logo is on the bottom so you can print it on glass or other smooth surfaces to get a mirror like finish. It prints well with various layer heights but I have been printing them at 0.2 and 0.3 with good results. If you print it on glass just make sure that your first layer is not under extruded so you get a good finish without gaps. In the example I posted I could stand to increase the first layer extrusion width a bit but it looks good in person...it is just a keychain ;)