Vesa mount spacer 100x100 20mm

Last crawled date: 5 years, 5 months ago

This is a printable 100x100mm vesa mount 20mm spacer that have the 4 screw holes pattern. This was designed to go behind a tablet wall mounting case to allow the tablet to be mounted directly over a wall outlet. This will fit very loosely over a standard outlet front plate to allow for precise positioning.
You will need M4 screws to screw the plate.
Printed on a Robo3D R2, you need a printer that can do around 160x160mm to print the mount. I used a brim but you should be able to print without it if you have good bed adhesion