Thingiverse
Vesa mount for Minix X5 / X7 / X8H by alexbern80
by Thingiverse
Last crawled date: 5 years, 8 months ago
This is a Vesa-100 mount to attach your Minix on the back side of your TV.
It is compatible with X5, X7 and X8H (no X5mini or X7mini).
Applying pads on the inside of the 2 bottom clips is recommended to keep the unit firm, but you must use soft rubber pads as shown in the photos so they are compressible enough to insert the device and push it in place.
Four standard M4 x10-12mm screws with a 6mm flat head are required. I suggest to use a big and strong screwdriver or you could have trouble in screwing.
Enjoy!
It is compatible with X5, X7 and X8H (no X5mini or X7mini).
Applying pads on the inside of the 2 bottom clips is recommended to keep the unit firm, but you must use soft rubber pads as shown in the photos so they are compressible enough to insert the device and push it in place.
Four standard M4 x10-12mm screws with a 6mm flat head are required. I suggest to use a big and strong screwdriver or you could have trouble in screwing.
Enjoy!