Thingiverse
VertexEvo (Rev.1) - Vertex K8400 Evolution by Bo_Ris
by Thingiverse
Last crawled date: 3 years, 1 month ago
This is the initial version of VertexEvo. Newer and improved version is published here.
Please check also my Vertex-H MOD, which is the next step after VertexEvo.
Before you start making such a major modification to your Vertex printer please be aware about Cons:
Properly assembled and tuned K8400 can produce rather good printouts and it is unlikely that this upgrade will further improve print quality
VertexEvo works in CoreXY printing mode that requires firmware upgrade to the latest Marlin version 1.1.5. As the result you will loose K8400-specific menu items like filament loading/unloading, LED light control, etc. Entire menu structure will be different and it may take you some time to get used to it.
Front and side panels of K8400 are not strong enough to hold the amount of load produced in CoreXY mode. As the result the panels wobble and this in some cases may slightly degrade print quality. To address this you will need to attach 25mm x 3mm aluminium bars along the top of front and side panels.
Having polyurethane GT2 belts with steal threads is the must, however the threads eventually break, belts stretch and will need to be replaces 2-3 times a year.
You may need to adjust (lower) the speed and acceleration to retain original quality, i.e. overall printing time will increase. At certain speeds side panels start to resonate, which causes additional noise.
This mod requires soldering. You will need to relocate X-stop sensor from back panel to the print-head, extend and re-route X-stop wires.
You will need to drill a hole in aluminium plate supporting the print-bed to move it forward and down as described here.
and Pros:
Printer has much simpler mechanics, only linear bearings and is easier to tune and maintain.
There are only 2 belts instead of 6 in the original design.
The carriage outer shape is very simple, which makes it easy to change the print-head. You can even design and attach your own print-head, for example single e3D with proximity sensor, etc.
When using dual e3D, there is no need to cut heat sinks as in my other designs published here and here.
Dual e3D mount can be tilted along Y-axis that makes it very easy to level nozzles.
Overall print volume increases from the original 6840 cm³ to over 7414 cm³.
This design is completely revertible, i.e. you can always roll back to the old configuration.
Other considerations:
STL files posted here were designed for 0.35mm nozzles (wall thickness 0.7, 1.05 and 1.4mm). They were printed with e3D hotend on K8400 that has all my mods posted earlier on Thingiverse. Unfortunately I have no way of testing how well the things posted here will print with the original hotend from Velleman.
You will need to use the latest Arduino version to compile and install the latest firmware.
Having 2 Carbon-fiber 8mm rods for X-axis is highly recommended. Each weights about 14 grams versus 200 grams of steel equivalent.
The print volume with dual e3D print-head and MK3 heated bed is X=182mm, Y=210mm and Z=194mm.
Bill of Materials
Left Motor and rear-left Y-rod mount
4 x M3 x 8mm screws for motor mount
2 x M3 x 12mm screws for Y-rod
4 x M5 x 16mm socket-cup screws
4 x M5 self locking nuts
1 x GT20 pulley with 5mm bore
Right Motor and rear-right Y-rod mount
4 x M3 x 8mm screws for motor mount
1 x M3 x 12mm screw for Y-rod
4 x M5 x 16mm socket-cup screws
4 x M5 self locking nuts
1 x GT20 pulley with 5mm bore
Left Front Corner with front-left Y-rod mount
1 x M5 x 50mm socket-cup screw
5 x M5 x 16mm socket-cup screws
6 x M5 self locking nuts
2 x GT2 idler pulleys with teeth and 5mm bore
2 x M3 x 12mm screws for Y-rod
Right Front Corner with front-right Y-rod mount
1 x M5 x 50mm socket-cup screw
5 x M5 x 16mm socket-cup screws
6 x M5 self locking nuts
2 x GT2 idler pulleys with teeth and 5mm bore
2 x M3 x 12mm screws for Y-rod
Left XY Clamp
2 x M3 x 16mm screws for Y-rods
6 x M3 x 12mm screws for X-rods
2 x M5 x 25mm socket head button screws
1 x GT2 idler pulley with teeth and 5mm bore
1 x GT2 idler toothless pulley with 5mm bore
1 x 8mm tube bearing
Right XY Clamp
2 x M3 x 16mm screws for Y-rods
6 x M3 x 12mm screws for X-rods
2 x M5 x 25mm socket head button screws
1 x GT2 idler pulley with teeth and 5mm bore
1 x GT2 idler toothless pulley with 5mm bore
1 x 8mm tube bearing
Rods
2 x 8mm x 315mm steel rods for Y-axis
2 x 8mm x 320mm carbon-fiber rods for X-axis
Print head
4 x 8mm IGLIDUR linear bearings
2 x e3d v6 original hotends (clones will not fit)
5 x M4 x 20mm socket cup screws for dual e3d holder and filament fan
8 x M3 x 15mm screws for dual e3d fan mount and for carriage corners
5 x M3 x 12mm screws mounting dual e3d holder and pcb with cable holder
2 x M3 washers (optional but recommended)
14 x M3 self locking nuts
9 x M3 x 8mm screws for X-stop sensor, filament fan mount, pcb mount
4 x M3 x 30mm socket cup screws for belt ends
1 x filament fan
Belts
2 x 1.5 meters of polyurethane belt with steel enforcement
Other
1 paper clip to hold belt ends
All bearings, filament fan and many screws and nuts can be reused from the original printer.
Please check also my Vertex-H MOD, which is the next step after VertexEvo.
Before you start making such a major modification to your Vertex printer please be aware about Cons:
Properly assembled and tuned K8400 can produce rather good printouts and it is unlikely that this upgrade will further improve print quality
VertexEvo works in CoreXY printing mode that requires firmware upgrade to the latest Marlin version 1.1.5. As the result you will loose K8400-specific menu items like filament loading/unloading, LED light control, etc. Entire menu structure will be different and it may take you some time to get used to it.
Front and side panels of K8400 are not strong enough to hold the amount of load produced in CoreXY mode. As the result the panels wobble and this in some cases may slightly degrade print quality. To address this you will need to attach 25mm x 3mm aluminium bars along the top of front and side panels.
Having polyurethane GT2 belts with steal threads is the must, however the threads eventually break, belts stretch and will need to be replaces 2-3 times a year.
You may need to adjust (lower) the speed and acceleration to retain original quality, i.e. overall printing time will increase. At certain speeds side panels start to resonate, which causes additional noise.
This mod requires soldering. You will need to relocate X-stop sensor from back panel to the print-head, extend and re-route X-stop wires.
You will need to drill a hole in aluminium plate supporting the print-bed to move it forward and down as described here.
and Pros:
Printer has much simpler mechanics, only linear bearings and is easier to tune and maintain.
There are only 2 belts instead of 6 in the original design.
The carriage outer shape is very simple, which makes it easy to change the print-head. You can even design and attach your own print-head, for example single e3D with proximity sensor, etc.
When using dual e3D, there is no need to cut heat sinks as in my other designs published here and here.
Dual e3D mount can be tilted along Y-axis that makes it very easy to level nozzles.
Overall print volume increases from the original 6840 cm³ to over 7414 cm³.
This design is completely revertible, i.e. you can always roll back to the old configuration.
Other considerations:
STL files posted here were designed for 0.35mm nozzles (wall thickness 0.7, 1.05 and 1.4mm). They were printed with e3D hotend on K8400 that has all my mods posted earlier on Thingiverse. Unfortunately I have no way of testing how well the things posted here will print with the original hotend from Velleman.
You will need to use the latest Arduino version to compile and install the latest firmware.
Having 2 Carbon-fiber 8mm rods for X-axis is highly recommended. Each weights about 14 grams versus 200 grams of steel equivalent.
The print volume with dual e3D print-head and MK3 heated bed is X=182mm, Y=210mm and Z=194mm.
Bill of Materials
Left Motor and rear-left Y-rod mount
4 x M3 x 8mm screws for motor mount
2 x M3 x 12mm screws for Y-rod
4 x M5 x 16mm socket-cup screws
4 x M5 self locking nuts
1 x GT20 pulley with 5mm bore
Right Motor and rear-right Y-rod mount
4 x M3 x 8mm screws for motor mount
1 x M3 x 12mm screw for Y-rod
4 x M5 x 16mm socket-cup screws
4 x M5 self locking nuts
1 x GT20 pulley with 5mm bore
Left Front Corner with front-left Y-rod mount
1 x M5 x 50mm socket-cup screw
5 x M5 x 16mm socket-cup screws
6 x M5 self locking nuts
2 x GT2 idler pulleys with teeth and 5mm bore
2 x M3 x 12mm screws for Y-rod
Right Front Corner with front-right Y-rod mount
1 x M5 x 50mm socket-cup screw
5 x M5 x 16mm socket-cup screws
6 x M5 self locking nuts
2 x GT2 idler pulleys with teeth and 5mm bore
2 x M3 x 12mm screws for Y-rod
Left XY Clamp
2 x M3 x 16mm screws for Y-rods
6 x M3 x 12mm screws for X-rods
2 x M5 x 25mm socket head button screws
1 x GT2 idler pulley with teeth and 5mm bore
1 x GT2 idler toothless pulley with 5mm bore
1 x 8mm tube bearing
Right XY Clamp
2 x M3 x 16mm screws for Y-rods
6 x M3 x 12mm screws for X-rods
2 x M5 x 25mm socket head button screws
1 x GT2 idler pulley with teeth and 5mm bore
1 x GT2 idler toothless pulley with 5mm bore
1 x 8mm tube bearing
Rods
2 x 8mm x 315mm steel rods for Y-axis
2 x 8mm x 320mm carbon-fiber rods for X-axis
Print head
4 x 8mm IGLIDUR linear bearings
2 x e3d v6 original hotends (clones will not fit)
5 x M4 x 20mm socket cup screws for dual e3d holder and filament fan
8 x M3 x 15mm screws for dual e3d fan mount and for carriage corners
5 x M3 x 12mm screws mounting dual e3d holder and pcb with cable holder
2 x M3 washers (optional but recommended)
14 x M3 self locking nuts
9 x M3 x 8mm screws for X-stop sensor, filament fan mount, pcb mount
4 x M3 x 30mm socket cup screws for belt ends
1 x filament fan
Belts
2 x 1.5 meters of polyurethane belt with steel enforcement
Other
1 paper clip to hold belt ends
All bearings, filament fan and many screws and nuts can be reused from the original printer.
Similar models
grabcad
free
GT2 idler pulley, 10mm belt, 8mm bore.
...gt2 idler pulley, 10mm belt, 8mm bore.
grabcad
smooth idler pulley for 10mm gt2 belt. 8mm internal bore.
grabcad
free
GT2 5mm bore idler pulley
...gt2 5mm bore idler pulley
grabcad
just a simple idler pulley file for gt2 x 6mm belts.
thingiverse
free
Hictop 3dp11 Adjustable Y Idler Mount 2.0 by SaberShip
...ler pulley for 6mm wide gt2 belt
1x m5 x30 bolt
1x m5 nylon lock insert nut (regular m5 nut may work)
2x m3 x10 screws
2x m3 nuts
thingiverse
free
Belt driven Z pulley mount w/ GT2 6mm belt 5mm bore 20t idler by Evilkoal
...e idler mount to fit the idlers i have.
gt2 20t 6mm belt, 5mm bore idler.
printed with 50% "archimedian chords" infill.
thingiverse
free
Elbow belt tensioner suitable for 2020 frame
...allbearing x 2
5mm id 20 tooth gt2 idler pulley
feature:
easy to print,easy to adjust,fit for various system,fit for closed belt.
3dwarehouse
free
Idler Pulley 8mm x 21mm x 11mm for GT2, T5, T2.5 belt
... for gt2, t5, t2.5 belt
3dwarehouse
8mm bore, 21mm inner(belt mount) diameter, 27mm outer diameter, 11mm width #cnc #gt2 #t2 #t5
thingiverse
free
Anet A8 single motor Z axis drive by osadchy
...he original 400 to 800)
hope i included everything here. if you find anything missing, please comment and i'll answer/update.
thingiverse
free
TRONXY X5S - Z motor sync by WT1704
...e platform on the stepper and 3 * m5 screws and nuts for the pulley
1 * m3 screw and nut to hold the tension stick with the block
thingiverse
free
M3 to M5 spacer hülse 3mm to 5mm for e.g. belt pulley by TimJuPe
...spacer for using m5 holes with m3 screws. designed this for fitting gt2 belt pulley wit m3 skrews. 8.5mm long (belt pulley width)
thingiverse
free
Hictop 3dp11 Adjustable Y Idler Mount by SaberShip
...rts:
x1 stock 608zz idler bearing
x1 stock m3 bolt and nut
x2 stock m5 bolts
x2 stock m5 t-slot nuts
x2 m3 x 10 screws
x2 m3 nuts
Vertexevo
thingiverse
free
Anti-spill Cup Holder by Bo_Ris
...designed to utilize the maximum print space of my vertexevo printer and can fit up-to 15 cm high cups....
thingiverse
free
VertexEvo (K8400) Z-axis Support by Bo_Ris
...here. don't forget to place spacers between clamps and the bearing. wider side of each spacer should face its adjacent clamp.
thingiverse
free
"Brake" for K8400 VERTEX Universal Spool Holder by Bo_Ris
...part2.stl is for the original vertex, part2evo.stl is for vertexevo with 3mm thick aluminium enforcement bars. part3 is designed...
thingiverse
free
VertexEvo with Ultimaker glass by Bo_Ris
...edesign things to make sure they all fit together.
update 8-feb-2018: new y-visor solving aforementioned issue is published here.
thingiverse
free
VertexEvo Y-visor by Bo_Ris
... make sure that y-visor_part3 moves freely and closes y-stop sensor only when pushed towards the back of the printer by xy_clamp.
thingiverse
free
Raspberry Pi Fish Eye Camera for VertexEvo by Bo_Ris
...3 x 6mm screws
2 x m5 x 16mm socket head screws
2 x m5 self locking nuts.
update 29-nov-2017 added flat cable holders and images.
thingiverse
free
Side Support for VertexEvo by Bo_Ris
...escription and remaining stl files.
note: this design requires drilling 4 additional 5mm holes in each side panel of the printer.
thingiverse
free
VertexEvo Rev.2 by Bo_Ris
...018 vertex-h project was a success. please read the description here and choose which of these 2 mods will work the best for you.
K8400
thingiverse
free
Amiga 1200 mouse and joystick mounting clip by figgy78
...sligthly more sturdy i printed mine on a velleman k8400 with e3d v6...
thingiverse
free
Velleman Vertex K8400 Cover by wolffm
...d without the additional parts
i added a drawing with measurements and two stl files for the cutouts on the polycarbonate panels
thingiverse
free
K8400 upside down support feet by ChosenAtRandom
... compatible with the height of the handles on the printer, so the handles support the sides, and the feet support front and back.
thingiverse
free
Vellemann Vertex K8400 Dual extruder with e3dv6 by Moeoppliger
...mm-x-40mm-x-20mm-dc-12v-2pin-brushless-cooing-cooler-small-mini-centrifugal/32828454981.html?spm=a2g0s.9042311.0.0.27424c4djkobl0
thingiverse
free
Vertex k8400 z-endstop extender by scottrlindsey
.../4 of the endstop extender away -- you the amount of extension you will need of course depends on the modification you are doing.
thingiverse
free
Vertex K8400 filament guide by Harry_D60
...edit nov 26th, 2018: added a second model, which has a bit better grip on the printer's panel & an alternate model guide.
thingiverse
free
Velleman K8400 heated bed strain relief clamp by ChosenAtRandom
...ways add a couple of extra layers in there so there is some solid plastic for the tap to cut into - i used 4 layers on this part.
thingiverse
free
Vertex k8400 Extruder upgrade MK8 by lordofdatatrash
...lex filament bestens geeignet.
benötigt wird
ein rillenkugellager 608zz
ein mk8 filament-antriebszahnrad
8mm achse für kugellager
thingiverse
free
Power cord connector and switch for Velleman Vertex K8400 by M_I_A
... velleman to replace the small corner brackets. like this you don't need to drill any holes or modify the original structure.
thingiverse
free
E3D on Vertex K8400 Remix by Hardbats
... of the new parts
update 11-10-2018
-uploaded new partcooler (v3) with fitment improvements againtst tilting and clearance issues
Ris
3d_export
$25
Parth 11 riing 3D Model
...ing 3d model
3dexport
parth 11 riing 3d model download .c4d .max .obj .fbx .ma .lwo .3ds .3dm .stl gorgsalvatore 109549 3dexport
3ddd
$1
Лампа Настольная Vita Ri 22163
...лампа настольная vita ri 22163
3ddd
vita , ri
лампа настольная vita ri 22163
3ddd
$1
Centennial Regulation Pool Table by RI Anderson
...by ri anderson
3ddd
brunswick
бильярдный стол в стиле ар-деко centennial regulation pool table by ri anderson
размеры 264x147x81h
cg_studio
$59
Colt M4A1 Carbine RIS Assault rifle3d model
...s .c4d .lwo .obj - colt m4a1 carbine ris assault rifle 3d model, royalty free license available, instant download after purchase.
3ddd
$1
Стол футуристический UZ-Ri
...вно существовало до нас. до нашей мысли.
так же, этот столик - частица уже созданного. миллионная частица большой тайны жизни...
3ddd
$1
Alpina chair
...ы: 800х570х515 мм
высота сидения: 400 мм
решетка на сидении сделана сплайном.
700 полигонов.
все материалы и текстуры в архиве.
3ddd
free
Диван JUMBO RIS-42b
...hymia
стиль: классика
длина: 155
глубина: 85
высота: 155
артикул: ris-42
варианты отделки: орех, крашенный, с золотом, с серебром
3ddd
$1
Кресло JUMBO RIS-41b
...hymia
стиль: классика
длина: 80
глубина: 85
высота: 155
артикул: ris-41b
варианты отделки: орех, крашенный, с золотом, с серебром
3d_export
$86
DPRK TaepoDong1 IRBM 3D Model
...sadan-ri launch facility truespace cob 3ds dxf obj directx visualmotion
dprk taepodong1 irbm 3d model visualmotion 22320 3dexport
3d_export
$95
DPRK Musudanri Launch Facility 3D Model
...tellite military gantry bunker kwangmyongsong-2 truespace cob
dprk musudanri launch facility 3d model visualmotion 22319 3dexport
Bo
3d_export
$49
Angus Bull 3D Model
...angus bull 3d model 3dexport bull angus bo taurus cow beef corrida cattle mammal animal animals farm...
3ddd
$1
Пуф Ирис
...ноги, а также как отдельное место для сидения. компания bobox. ...
3ddd
$1
Bo Concept Fermo
... тумба
моделировал для себя комод и тумбы bo concept fermo
полная информация о мебели в архиве
3ddd
$1
Bo Concept / Ulivi Salotti Kamal
...bo concept / ulivi salotti kamal
3ddd
boconcept
bo concept ulivi salotti kamal
3ddd
$1
End Scene Sofa in Black
...end scene sofa in black 3ddd dot&bo details & dimensions linkhttp://www.houzz.com/photos/10678017/end-scene-sofa-in-black-modern-sofas dimensions 85" w x 36.5"...
3ddd
$1
Pouf Area Line BO 12
...
3ds max 2010.v-ray 2.40.03.file formats fbx,obj. pouf bogo rossi di albizzate living area line bo 12. dimension : 65x65xh45 cm.
3ddd
$1
Bo Concept / Pinto
...bo concept / pinto
3ddd
boconcept
bo concept pinto
3ddd
$1
Gorenje BO 87 KR
...gorenje bo 87 kr
3ddd
gorenje , духовой шкаф
встраиваемой духовой шкаф gorenje bo87kr
3ddd
$1
Tile_Border gold by bo
...tile_border gold by bo
3ddd
итальянская плитка фирмы imola с текстурами
3ddd
$1
Tile Border red-gold_by bo
...tile border red-gold_by bo
3ddd
итальянская плитка imola с текстурами
Rev
3ddd
$1
Sova Design/Rev coffee table
... table
3ddd
журнальный
https://www.facebook.com/media/set/?set=a.514295972031044.1073741841.343660145761295&type;=3
3d_ocean
$5
Tachometer Gauge for Auto/Truck Instrument Panel
...panel lcd miles per hour mph promo racing rev reving sedan speed tachometer truck vehicle xpresso this is a...
3d_ocean
$89
Audi RS5 2011
...will debut at the 2010 geneva auto show. the high-reving 4.2-liter v8 with its 450 hp unleashes powerful performance...
3ddd
$1
Двигатель стирлинга.Привод тату-машины
...10 min., then let cool rotational frequency range 800—2000 revmin (depending on flame size and spacing) contents of assembly...
3d_ocean
$5
Speedometer Gauge for Auto/Truck Instrument Panel
...panel lcd miles per hour mph promo racing rev reving sedan speed speedometer truck vehicle xpresso this is a...
3d_export
$5
Rev Gun 3D Model
...rev gun 3d model
3dexport
rev gun
rev gun 3d model sone93 52014 3dexport
3d_export
$65
Ducati 350 Desmo 1971 3D Model
...don halls racing monster cafe racer desmodromic high technology rev engine ducati 350 desmo 1971 3d model gonzo_3d 20960...
3d_export
$8
tailstock of lathe machine
...give photo you can see the thread which pitch 5mm/rev and bolt and nut was inserted through solidework library...
3d_export
$15
Maverick REV-6
...n act as the main blaster of a nerfer, but due to the short range, it is recommended to use it as a secondary, additional weapon.
3d_export
$10
Lycia Coin
...in v-ray you will get same results like the prevew images.<br>i used only v-ray layers on renders.<br>textures designed and...
Evolution
3ddd
$1
Evolution 2 Gonzalo DE SALAS
...evolution 2 gonzalo de salas
3ddd
панно
evolution 2 gonzalo de salas
3ddd
$1
Carestream - DRX-Evolution
...carestream - drx-evolution
3ddd
медицина , больница
medical x-ray
3ddd
$1
Кресло Nadin COLECСION ALEXANDRA Evolution S1845
...on alexandra evolution s1845
3ddd
alexandra , nadin
коллекция испанской мебели alexandra
3ddd
$1
Spar
...spar 3ddd spar детская комната "web evolutionquot; ...
3ddd
$1
Espresso machine Dalla Corte Evolution
...фемашина , эспрессо машина
3d модель эспрессо машины dalla corte evolution с текстурами.
3d_ocean
$89
Nissan Murano
...elevates its unique position in the marketplace through a “super-evolution of the original design. the...
3d_ocean
$89
Mitsubishi Lancer Evolution 2001
...y, in real units of measurement, qualitatively and maximally close to the original. model formats: - *.max (3ds max 2008 scanl...
3d_ocean
$89
Mitsubishi Lancer Evolution X
...eated on real car base. model is created accurately, in real units of measurement, qualitatively and maximally close to the or...
3d_ocean
$19
Human Ancestor
...anatomy ancestor animal black body cave caveman character dark evolution fantasy fur game gorilla hair human life male man...
3d_ocean
$6
Customisable DNA Strand with Style Options
...chemical chromosomes coil csi custom data dna double helix evolution future genetic genetics human ladder microscopic model molecule mutation...
Vertex
3ddd
$1
Rose orange
...включены 2012, 2013, 2014 max, obj. polys 118 204; vertex 74 014; сетка состоит из 4-хугольников, оптимизирована, интерполяция =...
3d_ocean
$6
Motion Set
...for motion graphic artist , total poly 143.952 total vertex ...
3d_ocean
$8
Folding Paper Plane animation
...origami paper paperplane plane vray folding paper plane – vertex animation material – paper, 3d model – konrad rakowski,...
3ddd
$1
Постельное белье "Paris"
...все необходимые текстуры присутствуют! использовался плагин collorcorrection polys: 254780 vertex 128199 форматы: fbx, obj,...
3ddd
$1
Versal Lux Table
...компании феликс. размеры: 205х90х77h текстуры присутствуют polys: 34 763 vertex 36...
3ddd
$1
REACTION POETIQUE Composition
...хлеба и деревянного декора сassina reaction poetique. polygon: 231192 vertex 235714 материалы настроены под vray...
3ddd
$1
BUFFET VERTEX
...nical specification :
height 65 cm , width 150 cm , depth 43 cmhttp://www.oppa.com.br/buffet-vertice-4-portas-amarelo
3ddd
$1
Люстра Osgona Fastosita Art.697112
...(vray) + fbx вес без turbosmooth: poly: 281 061 vertex 285 238 hi-poly. в материале кристаллов выставлена дисперсия, которая...
3ddd
$1
Бра Osgona Fastosita Art.697652
...(vray) + fbx вес без turbosmooth: poly: 113 741 vertex 114 081 hi-poly. в материале кристаллов выставлена дисперсия, которая...
3ddd
$1
Arteriors Hera Oval Chandelier #DS89001
...chandelier. dimensions: w: 110.49, d:69.85, h-34.29 cm polys: 121688 vertexs: ...
1
3d_export
$100
PSO1M2 3D Model
...pso1m2 3d model
3dexport
sight weapon ussr russia pso pso-1 pso-1m2 sniper
pso1m2 3d model rosco.ru64776 34173 3dexport
3d_export
$20
BED 1 3D Model
...bed 1 3d model
3dexport
bed girl's bedroom
bed 1 3d model corbu 32960 3dexport
3d_export
$69
Convexshapes Kitchen Decoration Volume 1 3D Model
...rater meal spaghetti plate cutlery seafood chopping
convexshapes kitchen decoration volume 1 3d model convexshapes 69727 3dexport
3d_export
$69
Convexshapes Kitchen Decoration Volume 1 3D Model
...rater meal spaghetti plate cutlery seafood chopping
convexshapes kitchen decoration volume 1 3d model convexshapes 69722 3dexport
3d_export
$150
Cityscape pack vol 1 3D Model
...tro tile flat tree traffic environment scene aerial view textures materials
cityscape pack vol 1 3d model terreo76 30816 3dexport
3d_export
$8
Toyota GTOne Base 3D Model
...3d model 3dexport 1998 toyota gt-one gtone gt1 gt-1 gt/1 gt base sports muscle car vehicle transport exotic concept...
3d_export
$99
Convexshapes Kitchen Decoration Volume 1 3D Model
...rater meal spaghetti plate cutlery seafood chopping
convexshapes kitchen decoration volume 1 3d model convexshapes 69719 3dexport
3d_export
$20
Headphones 1 3D Model
...cinema c4d detailed music instrument sound studio headphone headphones ear black dark
headphones 1 3d model cgaxis 70077 3dexport
3d_export
$19
Square Door Handles Collection 1 3D Model
...madera bedroom recamara house casa decoration decoracion interior
square door handles collection 1 3d model jff111 74341 3dexport
3d_export
$99
Triumph GT6 Mk 1 3D Model
...onvertible sport speedster triumph spitfire 1967 1966 classic british leyland
triumph gt6 mk 1 3d model desmonster 77916 3dexport