VERTEX - K8400 spacer in combination with the PRINTinZ build plate by czvt7w

Last crawled date: 4 years, 7 months ago

This spacer can be used when the Glass build panel and BuildTak is replaced with the PRINTinZ flexible build plate. The Glass build plate in combination with a BuildTak sheet is about 4.2mm thick. The PRINTinZ build plate is about 3.5 mm thick. The original bed clips will not hold the PRINTinZ build plate in place so I have designed a spacer that should be installed underneath the aluminium build plate to reduce the bed clips space with 0.7mm. Remove the bed clips and install the spacer and next install the bed clips again. This should hold the PRINTinZ flexible build plate firmly in place. You have to print it twice for left and right!