Thingiverse
Versatile Arduino Nano Enclosure
by Thingiverse
Last crawled date: 5 years, 10 months ago
Hi folks,
here's a versatile enclosure for your Arduino Nano projects. The Nano can be slit in and it's Micro USB connector is accessible from the outside. There is also some space for a prototyping board.
To close the enclosure, use a metal sheet that you bend in an L, keep closed with 2 screws.
I print this with no rafts or supports, 100% infill, 0.4mm nozzle, 0.32mm layer height, with PLA or ABS.
here's a versatile enclosure for your Arduino Nano projects. The Nano can be slit in and it's Micro USB connector is accessible from the outside. There is also some space for a prototyping board.
To close the enclosure, use a metal sheet that you bend in an L, keep closed with 2 screws.
I print this with no rafts or supports, 100% infill, 0.4mm nozzle, 0.32mm layer height, with PLA or ABS.