Thingiverse
Velleman MK194N radio case by 3DSmile
by Thingiverse
Last crawled date: 4 years, 6 months ago
I soldered a radio using the Velleman MK194N solder kit, but it needed a case.
So I designed one. The board fits very tight in the gap.
You will need:
4x M3 screw (length between 10 and 30 mm)
1x case_bottom
1x case_top (and 1x case_top_text if you want to print this in color)
7x pin
Back of the speaker is inspired by https://www.thingiverse.com/thing:4668173 to somewhat improve audio quality.
Future updates:
-add usb port for charging
-add battery
-add retractable antenna
So I designed one. The board fits very tight in the gap.
You will need:
4x M3 screw (length between 10 and 30 mm)
1x case_bottom
1x case_top (and 1x case_top_text if you want to print this in color)
7x pin
Back of the speaker is inspired by https://www.thingiverse.com/thing:4668173 to somewhat improve audio quality.
Future updates:
-add usb port for charging
-add battery
-add retractable antenna