Thingiverse
Variable column by Fredle1957
by Thingiverse
Last crawled date: 4 years, 11 months ago
CAUTION: I only design Gravitrax parts and extensions that are not available for purchase.
This construction is a variable pillar that can perform many functions.
The pillar consists of the inserts (green) and the mounting stones (white).
Round rods with a diameter of 6mm are required for assembly. I used wooden dowels, which are available in different lengths (30mm, 40mm to 1m). Other round rods with 6mm can also be used.
There are three types of recording stones:
The lower stone consists of two parts (“Aufnahme Grundplatte” and “Grundplatte”), these parts are printed individually and then glued together.
With the “Aufnahme” the pillar is built up, this stone can be used several times – also as an upper end.
On the “Abschluss Oben” any curved stone or a transparent plate can be placed.
If a high column (see Bild 7) is required, spacers can be used to stabilize.
https://www.youtube.com/watch?v=-WVuFtHWTpU
This construction is a variable pillar that can perform many functions.
The pillar consists of the inserts (green) and the mounting stones (white).
Round rods with a diameter of 6mm are required for assembly. I used wooden dowels, which are available in different lengths (30mm, 40mm to 1m). Other round rods with 6mm can also be used.
There are three types of recording stones:
The lower stone consists of two parts (“Aufnahme Grundplatte” and “Grundplatte”), these parts are printed individually and then glued together.
With the “Aufnahme” the pillar is built up, this stone can be used several times – also as an upper end.
On the “Abschluss Oben” any curved stone or a transparent plate can be placed.
If a high column (see Bild 7) is required, spacers can be used to stabilize.
https://www.youtube.com/watch?v=-WVuFtHWTpU