Thingiverse
Variable base stand for TUSH V2
by Thingiverse
Last crawled date: 5 years, 9 months ago
This is a simple base for TUSH V2 https://www.thingiverse.com/thing:2047554 to acommodate standard 62mm wide spools (I use these on a regular basis) and also for more narrow ones. Just put one TUSH-half in the fixed position and the other in either the second fixed position for 62mm or the wider non fixed position for anything between 46mm and 18mm.
Measurements given are all taken mid-bearing to mid-bearing, bBut there is enough wiggleroom so the fixed position should work from 60 - 65mm.
As usual, OpenSCAD-file included for easy changing.
Have fun!
Measurements given are all taken mid-bearing to mid-bearing, bBut there is enough wiggleroom so the fixed position should work from 60 - 65mm.
As usual, OpenSCAD-file included for easy changing.
Have fun!