Thingiverse
Vanderhall Mounts
by Thingiverse
Last crawled date: 4 years, 2 months ago
I recently got a 2020 Vanderhall Venice GT (it is SO cool and so much fun! https://vanderhallusa.com/2020-vanderhall-venicegt-red-san-diego-029/) I put my personal touches in it (GPS, Sirius XM, switch panel, Vape Station, etc) and thought I would post what I did, just in case someone else has/gets one and wants to do the same. No Vanderhalls were harmed during the installation of these components. All were designed to use the original dash screw locations to anchor the mounts for the accessories. The License plate stand-offs allow you to mount your motorcycle license plate with the frame of your choice (Vanderhall only allowed enough space for the plate only).
A couple of them are remixes - The Garmin GPS mount combines my plate with the ball piece from the Garmin Dashcam 20 mount cited here. Simply drop my plate to the bed with the bottom on the bed and centered, then drop the ball mount into it, also centered. The vape station is also a remix, though I must apologize, I can't remember all of the items that make it up. I know it's base is a resize of the one on here designed for a Ford F250 console phone holder insert, and the mod holder is a resize of a cup holder mod holder also from here. The fluid bottle holder also comes from here, as well as the battery holder, resized to fit up to and including 21700 batteries. The switch panels shown also come from here and were modified in Customizer to fit the dimensions I needed and switch count. I also allowed extra room above the switches to allow me to drill and mount LED indicators.
The pedestal in the center between the seats holds a dashmount 2 port USB. I cut the USB A connection ends off, then hooked the power wires (red +, black -) only up to a 15 A USB buck converter, and is used to power heated clothing for my wife and I to use in the winter. WARNING - DO NOT PLUG YOUR PHONE INTO THIS TO CHARGE! IT'S POWER IS TOO HIGH AND IT WILL FRY YOUR PHONE!
I first prototyped everything in PLA, then printed the production parts in PETG once I had made the final adjustments. PETG is MUCH easier to print than ABS, and also has the required flexibility and heat resistant properties for something that will be in the sun. Most of these items are going to be subjected to road vibration, so I recommend you print with a high infill - minimum 75%.
All components used in this were procured from Amazon.
All parts that I designed were done in Fusion 360, and everything was combined/arranged/sliced in Simplify 3D.
UPDATE 1/25/20
I had a flash of inspiration after realizing I had the classic lines of the dash filled with my gadgets, so I also designed a center console, which you also see here. I moved everything off of the dash to this console, which fits quite neatly between the heater and the shifter console. All the parts are hear, as above all printed in PETG (parts this big, you really don't want to use ABS, because the WILL warp!) The are already split for larger format printers (330mm x 330mm). To get the driver side panels, simply mirror the X Axis in your slicer. Below is a list of the components used that this was designed for:
https://www.amazon.com/gp/product/B01M5AHF0Z/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 Used on th erocker switches so the panel can be removed if neccesaryhttps://www.amazon.com/gp/product/B01H1RDJOI/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1 Temp Guagehttps://www.amazon.com/gp/product/B071Y7SMVQ/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1 Rocker Switcheshttps://www.amazon.com/gp/product/B01F2GT7UK/ref=ppx_yo_dt_b_asin_title_o05_s01?ie=UTF8&psc=1 LED Indicatorshttps://www.amazon.com/gp/product/B07CWF8CRX/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1 Main power and CB connectionshttps://www.amazon.com/gp/product/B07FXP4MNY/ref=ppx_yo_dt_b_asin_title_o00_s01?ie=UTF8&psc=1 Clock (on dash between center guages)https://www.amazon.com/gp/product/B078V66BRD/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1 Driving Lightshttps://www.amazon.com/gp/product/B07VKZ4CV6/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1 5V power converter (DO NOT plug your phone or tablet into this circuit!!! Voltage is right, but the amps are way too high - it WILL most likely fry your device!!!)https://www.amazon.com/gp/product/B00I59XQKO/ref=ppx_yo_dt_b_asin_title_o02_s02?ie=UTF8&psc=1 Satellite Radiohttps://www.amazon.com/gp/product/B07HFHFXYB/ref=ppx_yo_dt_b_asin_title_o02_s02?ie=UTF8&psc=1 CB Radiohttps://www.amazon.com/gp/product/B01IPXRQZA/ref=ppx_yo_dt_b_asin_title_o02_s03?ie=UTF8&psc=1 CB Radio Antennahttps://www.amazon.com/gp/product/B01NBF5ITH/ref=ppx_yo_dt_b_asin_title_o02_s04?ie=UTF8&psc=1 GPShttps://www.amazon.com/gp/product/B07LDPQSVJ/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1 3M "Iron Tape"
Enjoy! If you have any questions, feel free to reach out to me!
A couple of them are remixes - The Garmin GPS mount combines my plate with the ball piece from the Garmin Dashcam 20 mount cited here. Simply drop my plate to the bed with the bottom on the bed and centered, then drop the ball mount into it, also centered. The vape station is also a remix, though I must apologize, I can't remember all of the items that make it up. I know it's base is a resize of the one on here designed for a Ford F250 console phone holder insert, and the mod holder is a resize of a cup holder mod holder also from here. The fluid bottle holder also comes from here, as well as the battery holder, resized to fit up to and including 21700 batteries. The switch panels shown also come from here and were modified in Customizer to fit the dimensions I needed and switch count. I also allowed extra room above the switches to allow me to drill and mount LED indicators.
The pedestal in the center between the seats holds a dashmount 2 port USB. I cut the USB A connection ends off, then hooked the power wires (red +, black -) only up to a 15 A USB buck converter, and is used to power heated clothing for my wife and I to use in the winter. WARNING - DO NOT PLUG YOUR PHONE INTO THIS TO CHARGE! IT'S POWER IS TOO HIGH AND IT WILL FRY YOUR PHONE!
I first prototyped everything in PLA, then printed the production parts in PETG once I had made the final adjustments. PETG is MUCH easier to print than ABS, and also has the required flexibility and heat resistant properties for something that will be in the sun. Most of these items are going to be subjected to road vibration, so I recommend you print with a high infill - minimum 75%.
All components used in this were procured from Amazon.
All parts that I designed were done in Fusion 360, and everything was combined/arranged/sliced in Simplify 3D.
UPDATE 1/25/20
I had a flash of inspiration after realizing I had the classic lines of the dash filled with my gadgets, so I also designed a center console, which you also see here. I moved everything off of the dash to this console, which fits quite neatly between the heater and the shifter console. All the parts are hear, as above all printed in PETG (parts this big, you really don't want to use ABS, because the WILL warp!) The are already split for larger format printers (330mm x 330mm). To get the driver side panels, simply mirror the X Axis in your slicer. Below is a list of the components used that this was designed for:
https://www.amazon.com/gp/product/B01M5AHF0Z/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 Used on th erocker switches so the panel can be removed if neccesaryhttps://www.amazon.com/gp/product/B01H1RDJOI/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1 Temp Guagehttps://www.amazon.com/gp/product/B071Y7SMVQ/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1 Rocker Switcheshttps://www.amazon.com/gp/product/B01F2GT7UK/ref=ppx_yo_dt_b_asin_title_o05_s01?ie=UTF8&psc=1 LED Indicatorshttps://www.amazon.com/gp/product/B07CWF8CRX/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1 Main power and CB connectionshttps://www.amazon.com/gp/product/B07FXP4MNY/ref=ppx_yo_dt_b_asin_title_o00_s01?ie=UTF8&psc=1 Clock (on dash between center guages)https://www.amazon.com/gp/product/B078V66BRD/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1 Driving Lightshttps://www.amazon.com/gp/product/B07VKZ4CV6/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1 5V power converter (DO NOT plug your phone or tablet into this circuit!!! Voltage is right, but the amps are way too high - it WILL most likely fry your device!!!)https://www.amazon.com/gp/product/B00I59XQKO/ref=ppx_yo_dt_b_asin_title_o02_s02?ie=UTF8&psc=1 Satellite Radiohttps://www.amazon.com/gp/product/B07HFHFXYB/ref=ppx_yo_dt_b_asin_title_o02_s02?ie=UTF8&psc=1 CB Radiohttps://www.amazon.com/gp/product/B01IPXRQZA/ref=ppx_yo_dt_b_asin_title_o02_s03?ie=UTF8&psc=1 CB Radio Antennahttps://www.amazon.com/gp/product/B01NBF5ITH/ref=ppx_yo_dt_b_asin_title_o02_s04?ie=UTF8&psc=1 GPShttps://www.amazon.com/gp/product/B07LDPQSVJ/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1 3M "Iron Tape"
Enjoy! If you have any questions, feel free to reach out to me!
Similar models
thingiverse
free
Guitar Pickup Winder
...=utf8&psc=1
speed adjustmenthttps://www.amazon.com/gp/product/b07vpnhs5j/ref=ppx_yo_dt_b_asin_title_o02_s01?ie=utf8&psc=1
thingiverse
free
50A Power Supply Cover W/LCD Display by hkgary_g
...lpage_o06_s01?ie=utf8&psc=1
power socket
www.amazon.com/gp/product/b06xnmt3wl/ref=oh_aui_detailpage_o06_s00?ie=utf8&psc=1
thingiverse
free
U360gts, small frame
...ectronics&sr=1-1-catcorr
more information about the project:
https://github.com/raul-ortega/u360gts/blob/master/wiki/index.md
thingiverse
free
Hand Mixer by OM3
...e?ie=utf8&psc=1
power supplyhttps://www.amazon.com/gp/product/b01461mogq/ref=ppx_yo_dt_b_search_asin_title?ie=utf8&psc=1
thingiverse
free
Desk Fan by NebNorse
...lpages04?ie=utf8&psc=1
motor control: https://www.amazon.com/gp/product/b01cnl6imc/ref=od_aui_detailpages04?ie=utf8&psc=1
thingiverse
free
Curved Lithophane Holder by vbdcbrenner
..._s00?ie=utf8&psc=1
switch - https://www.amazon.com/gp/product/b07cg2vgwg/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=utf8&psc=1
thingiverse
free
Sonoff Enclosure by JeffLZ
...title_o00_s00?ie=utf8&psc=1
https://www.amazon.com/gp/product/b00qvb6qpu/ref=ox_sc_saved_title_1?smid=atvpdkikx0der&psc=1
thingiverse
free
12 Function Deep Dish Button Box by coyoteyz13
..._title_o03_s00?ie=utf8&psc=1
https://www.amazon.com/gp/product/b07vhcb1q4/ref=ppx_yo_dt_b_search_asin_title?ie=utf8&psc=1
thingiverse
free
M3d - USB Hub clips by mrhea00
...arch_detailpage?ie=utf8&psc=1
fan:https://www.amazon.com/gp/product/b003xn24gy/ref=oh_aui_search_detailpage?ie=utf8&psc=1
thingiverse
free
40A Power Supply Cover W/LCD Display by hkgary_g
...lpage_o06_s01?ie=utf8&psc=1
power socket
www.amazon.com/gp/product/b06xnmt3wl/ref=oh_aui_detailpage_o06_s00?ie=utf8&psc=1
Vanderhall
cg_trader
$15
Vanderhall Motor Works logo
...
3d model vanderhall motor works logo , available in obj, mtl, 3ds, fbx, c4d, lwo, lw, lws, ma, mb, ready for 3d animation and ot
cg_trader
$15
vanderhall logo
... maya. you can use the logo when creating more complex models. there is also a .stl file, you can print the logo on a 3d printer.
Mounts
3d_export
free
mounting bracket
...the part of a hinge, handle or latch that mounts the hardware to a cabinet. mounting plates make it...
turbosquid
$2
MOUNTING
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mounts
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mount Fuji
...fuji
turbosquid
free 3d model mount fuji for download as obj on turbosquid: 3d models for games, architecture, videos. (1579977)
3d_export
$5
Headphone mount LR
...headphone mount lr
3dexport
headphone mount l+r
turbosquid
$39
Mount rainier
...quid
royalty free 3d model mount rainier for download as fbx on turbosquid: 3d models for games, architecture, videos. (1492586)
turbosquid
$5
pipe mounting
...quid
royalty free 3d model pipe mounting for download as obj on turbosquid: 3d models for games, architecture, videos. (1293744)
turbosquid
$3
Mounting Tires
...uid
royalty free 3d model mounting tires for download as fbx on turbosquid: 3d models for games, architecture, videos. (1708511)
3d_export
$5
Magnetic GoPro Mount
...pro mount
3dexport
cool magnetic mount for gopro. allows you to mount the camera on flat metal surfaces and get exclusive shots.
turbosquid
$5
Stone Mount
...ty free 3d model stone mount for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1370306)