Thingiverse
V6 Baseplate lowered by 6mm
by Thingiverse
Last crawled date: 5 years, 4 months ago
I wanted to add auto bed leveling to my CR10 with an inductive probe, but that meant I had to remove my glass plate.
Unfortunately, the CR10 is not designed to go down any further than the glass plate, so my nozzle would never touch the metal buildplate.
This is a modified version of the Heavy Duty V6 Mount from here: https://www.thingiverse.com/thing:2494642
It is compatible with all attachments and other fittings.
This mod will make the nozzle roughly 6mm lower than the original, which allows you to print directly on the metal build plate (I'd suggest using some BuildTak or tape or something rather than directly on the bed).
Unfortunately, the CR10 is not designed to go down any further than the glass plate, so my nozzle would never touch the metal buildplate.
This is a modified version of the Heavy Duty V6 Mount from here: https://www.thingiverse.com/thing:2494642
It is compatible with all attachments and other fittings.
This mod will make the nozzle roughly 6mm lower than the original, which allows you to print directly on the metal build plate (I'd suggest using some BuildTak or tape or something rather than directly on the bed).