USB C and micro SD card mount for CR20/CR20 Pro by ssrix

Last crawled date: 3 years, 4 months ago

This can be used with the SKR 1.4 Turbo mounted with:
https://www.myminifactory.com/object/3d-print-skr-1-3-1-4-bracket-for-creality-cr-20-124934.
This CR20 SKR 1.4 mount puts the sd card and usb out of the range of the holes. This print is used to retrofit a usb c and micro sd card extender in the creality cr20, using the existing holes in the case, when using a different mainboard. This can be printed without supports and on its end. The skr 1.4 uses a usb b connector so I used a usb b to usb c adapter. The usb c female end should slot into this mount.
I bought this micro sd card extender and removed the outer plastic housing:
https://www.amazon.co.uk/TF-Card-Extension-Cable/dp/B07GR2HT2Q/ref=sr_1_4?crid=1JRS6JLPFHVIB&dchild=1&keywords=micro+sd+extender&qid=1603813896&s=computers&sprefix=micro+sd+exte%2Ccomputers%2C139&sr=1-4
You can then put it in the printed mount. You may need to slight sand or file down the screw hole in the case and the old usb port hole. Hot glue it all in place and screw it back up and it looks like nothing changed.