Thingiverse
Updated: ESP32 LoRa TTGO V2 LilyGO TTN OLED Case by decoder
by Thingiverse
Last crawled date: 4 years, 1 month ago
If you found this useful, please donate what you think it is worth to my paypal.me. Help cover the time of design.
Thanks, Enjoy!
https://www.youtube.com/watch?v=n6k_8D885sE
This is a case for the version 2 of the TTGO ESP32 LoRa development board with external antena. Inside you can fit a small LiPo battery. From the case you have access to the Reset button, power on/of and on the SD Card slot. You will need three M2x12 (or better 16) screws.
For more information about using this module you can read the following "The Things Network" thread:https://www.thethingsnetwork.org/forum/t/big-esp32-sx127x-topic-part-2/11973/198
Added a new variant of the top side where an extra button can be added (see the video).
Added a new variant of the bottom side where a feature connector can be fitted 6pin 1 row 2mm pitch connector. There can go e.g. an UART controlled GPS module
Thanks, Enjoy!
https://www.youtube.com/watch?v=n6k_8D885sE
This is a case for the version 2 of the TTGO ESP32 LoRa development board with external antena. Inside you can fit a small LiPo battery. From the case you have access to the Reset button, power on/of and on the SD Card slot. You will need three M2x12 (or better 16) screws.
For more information about using this module you can read the following "The Things Network" thread:https://www.thethingsnetwork.org/forum/t/big-esp32-sx127x-topic-part-2/11973/198
Added a new variant of the top side where an extra button can be added (see the video).
Added a new variant of the bottom side where a feature connector can be fitted 6pin 1 row 2mm pitch connector. There can go e.g. an UART controlled GPS module