universal water nozzle for wet grinding watering etc by FaberUnserzeit

Last crawled date: 3 years ago

I made this to abuse my angle grinder to wet-cut corners into tiles with an old diamond disc that the roofers dropped in our rubble-container.
This is just a bad example for how to use this. Bringing electrical machine tools close to water risks your life or, if you have an ELCB, may interrupt your child's TV-program and still kill you. To still make this of use for you, I made it customizalbe, so you can create your own garden-tube water nozzle duct system with a clamp that fits to your garden fence or whatever.
If you still want to use this with an angle grinder, DO THIS AT YOUR OWN RISK!
Update:
I have changed some default values: The outer diameter of the thread of the nozzle was too small for the resulting inner diameter to be stable. Also the thread went too smooth, so I decreased the value of ws a very little bit. The connector of the two clamps was too massive and I made it smaller.
Introduction of the variable ath standing for arm-thickness. The arms' thickness was simply twice the wall-thickness, which is not flexibel enough.
Though the resulting object looks different I left the screenshots as they are.
2016-08-23:
As requested in a comment I have made a video of this in action:https://www.youtube.com/watch?v=EiLDsG2-Uqg