Thingiverse
Universal telescope eyepiece smartphone mount V2 by Robert_G
by Thingiverse
Last crawled date: 4 years, 7 months ago
Problems at the original design:
Cannot fix on short eyepieces (ex.10mm)
The clip are pressing side phone's buttons
Eyepiece rubber ring must be removed to use the holder
Cannot use the holder on other eyepiece's than standard 1'25(ex. planetary 5mm)
Fixes:
1.Narrowed the part in contact with the eyepiece (17mm)
2.Redesigned the clips to not touch side phone's buttons
3.Clearance for the rubber ring on the eyepiece's holder part, so no longer need to remove it.
4.Redesigned the holder part at eyepiece, so you can fix it on bigger eyepieces but also can hold on standard 1'25 eyepieces.
5.I used four M6x30 bolts with hexagonal heads and four M6 "butterfly" nuts.
6.Added a larger (both dimensions) support with margin to prevent the phone for accidental falling.
Thanks to the author of the original design!
Cannot fix on short eyepieces (ex.10mm)
The clip are pressing side phone's buttons
Eyepiece rubber ring must be removed to use the holder
Cannot use the holder on other eyepiece's than standard 1'25(ex. planetary 5mm)
Fixes:
1.Narrowed the part in contact with the eyepiece (17mm)
2.Redesigned the clips to not touch side phone's buttons
3.Clearance for the rubber ring on the eyepiece's holder part, so no longer need to remove it.
4.Redesigned the holder part at eyepiece, so you can fix it on bigger eyepieces but also can hold on standard 1'25 eyepieces.
5.I used four M6x30 bolts with hexagonal heads and four M6 "butterfly" nuts.
6.Added a larger (both dimensions) support with margin to prevent the phone for accidental falling.
Thanks to the author of the original design!