Universal Piezo Z-Probe PCB v2.75 (for 1,2,3 or more piezos) 3d model
3dmdb logo
GrabCAD
Universal Piezo Z-Probe PCB v2.75 (for 1,2,3 or more piezos)

Universal Piezo Z-Probe PCB v2.75 (for 1,2,3 or more piezos)

by GrabCAD
Last crawled date: 2 years ago
Source: https://www.precisionpiezo.co.uk

This is the Precision Piezo Universal PCB (by Moriquendi) V2.75!



Which we also supply with our universal kits. It enables up to 3 piezos to be attached so is suitable for hotend piezo z-probes (with drilled piezos) or underbed piezo z-probes with 3x undrilled piezos.



V2.75 PCB:

has mounting hole, which can be snapped off if not needed.
Has an active low (NC) monostable output now called TRG. This means failsafe operation, and a 0.25sec delay when triggered.
It is now possible to check it is powered up at a glance, as the red TRG LED is lit when powered.
A SIG output (which operates NO/active high) is also provided in case you cannot configure your printer for active low.


It can be tuned (see online resources) to acccept a wide range of piezo sensors/discs. Its purpose is to turn the signal generated by a piezo disc when compressed or flexed into a 5v (or 3.3v depending on input voltage) endstop-style signal for your 3D printer, or other equipment, to detect as a trigger.



The boards are constantly evolving and the board you receive will have all the functionality as described above, but may vary slightly in appearance, or have additional improvements.



PCBs are made in batches and therefore the colour of the PCB may vary from that shown.



We are pleased to offer a 3 month warranty on this product.

Tags