Unitek S1203A M.2 Aluminum Enclosure Case by STEGOBOARD

Last crawled date: 3 years, 3 months ago

Precisely designed for the Unitek S1203A M.2 Aluminum Enclosure. The tapered interior cavity creates a friction grip while the enclosure is being slid in place. A small internal space between the inside cavity wall and enclosure's wall allow for unobstructed ventilation of heat while large file transfers occur. Ridges are embedded on the outside wall allow for a firm secure hand grip to prevent accidental drops.
Another set of ridges have been embedded along the sides at the bottom for the optional cable storage tray. These ridges create a friction fit for the tray to securely hold on to the case. The cable storage tray has been designed to hold the included USB 3 Gen 2 type C cable included.
You can easily mount it to a STEGO BOARD product wherever there are Pi Zero hole patterns!
Or use wood screws to attach it anywhere you desire!
Optional Fasteners:
Four M3 x 8mm long machine screws.
Four M3 nuts.
For ideas on how to use this 3D printed item, visit:stegoboard.com