Thingiverse
UniFi/Ubiquiti G4 Doorbell 4° siding adapter for 20° adapter by dev_dull
by Thingiverse
Last crawled date: 4 years, 8 months ago
This is an adapter for an adapter ... because why not make things confusing?
The UniFi G4 Doorbell comes with an adapter to angle it left or right by 20°. This 3D model will tilt the included adapter forward by 4° for clapboard siding. This model should also work well for shingle and shake siding. The longer set of screws that shipped with the doorbell works with this adapter.
This took me about 40min to print and I was able to friction fit it onto the 20° adapter.
The UniFi G4 Doorbell comes with an adapter to angle it left or right by 20°. This 3D model will tilt the included adapter forward by 4° for clapboard siding. This model should also work well for shingle and shake siding. The longer set of screws that shipped with the doorbell works with this adapter.
This took me about 40min to print and I was able to friction fit it onto the 20° adapter.