Thingiverse
Unicorn Advent Calendar by Ratmonkey
by Thingiverse
Last crawled date: 4 years, 1 month ago
Just a advent calendar. Made for a friend of mine.
Painted in sparkling pink for true unicorn feeling. ;-)
In contrast i used blue glow in the dark filament for the trays.
For convenience the unicorn is cut in to six pieces for small printers and need to be glued together after printing.
If you want to cut it yourself in pieces that fit your printbed, just use netfab-basic. The whole thing is includet as well.
You have to print the trays in following numers:
R20 = 14x
R15 = 5x
R28 = 1x
R18 = 1x
R17 = 1x
R14 = 1x
R12 = 1x
Print all 24 knobs, color the numers on the knobs as you like with a sharpie or a similar permanent marker an glue them into the trays im the order you want.
Have fun while printing and watch the face of the recipient if you give it away.
Painted in sparkling pink for true unicorn feeling. ;-)
In contrast i used blue glow in the dark filament for the trays.
For convenience the unicorn is cut in to six pieces for small printers and need to be glued together after printing.
If you want to cut it yourself in pieces that fit your printbed, just use netfab-basic. The whole thing is includet as well.
You have to print the trays in following numers:
R20 = 14x
R15 = 5x
R28 = 1x
R18 = 1x
R17 = 1x
R14 = 1x
R12 = 1x
Print all 24 knobs, color the numers on the knobs as you like with a sharpie or a similar permanent marker an glue them into the trays im the order you want.
Have fun while printing and watch the face of the recipient if you give it away.