Ultimate PSU Profile Box Cover Enclosure 300W 12v Tevo Tarantula by paul0

Last crawled date: 3 years, 5 months ago

PSU BOX
(take your own risk this is work in progress)
This all body cover for the Tevo Tarantula 300W PSU 12v/25A.
Parts:
Front enclosure
Back enclosure
Fan grill
Wires passthrough holder
What you need:
2x small screws for the PSU 2.5mm??
1x Switch 10A 250V 3 Pin IEC320 C14 AC Inlet Male Plug Power Socket With Fuse
2 x Tapping screws 3mmx15mm
Instructions:
-Printing with no supports 3 perimeters (1.2mm) except for the back box if you want to have a perfect fan hole, it will snap off easily
The grill may be glued or not, you can remix and do fancy grill the best diameter is 52.5mm
Make your AC Inlet connections and pass the wires two the corners, use two screws to fix it to the back box and if you want electrical tape on the wires to hold them in place.
Pass the wires through the front hole and make your connections to the PSU.
Close the box and snug the wires with the bracket.
Put the side screws to secure the enclosure to the PSU.
Hope you like it! Happy printing! Don't forget to leave a tip beer! :)
youtube: https://www.youtube.com/user/peekpt