Thingiverse
Ultimaker original UMO(+) Feeder damper by Tony84
by Thingiverse
Last crawled date: 4 years, 7 months ago
Inspired by Frederik Brückners design (https://www.youmagine.com/designs/ultimaker-original-or-plus-feeder-damper) and the spring socket from ataraxis I designed this feeder damper.
Print Platte_Final.stl and Extruderdaempfer_Halter_Final.stl in PLA and Gummidaempfer_Extruder_Final.stl in flex material (I used Polymaker Polyflex).
Because of the inlayed plate the mounting is much more stronger. You can give the connection between feeder an damper a bit more stabilization if you insert 2 pieces of filament (2,85 mm) in the given holes of the rubber part.
Additional parts: 4 M3 nuts and 4 M3 screws
Print Platte_Final.stl and Extruderdaempfer_Halter_Final.stl in PLA and Gummidaempfer_Extruder_Final.stl in flex material (I used Polymaker Polyflex).
Because of the inlayed plate the mounting is much more stronger. You can give the connection between feeder an damper a bit more stabilization if you insert 2 pieces of filament (2,85 mm) in the given holes of the rubber part.
Additional parts: 4 M3 nuts and 4 M3 screws