Thingiverse
UCT (VSCHT) Prague UPRT Fridge Magnet by JayJey
by Thingiverse
Last crawled date: 4 years, 3 months ago
A fun fridge magnet with a logo of University of Chemical Technology in Prague's department of Computing and Control Engineering (VŠCHT Praha - Ústav počítačové a řídicí techniky)
Note that this can be a fairly demanding print for the following reasons:
STL contains holes for the insertion of two magnets (5x2 mm) during print
Use of the "Pause at Layer Height" function is recommended to insert the magnets
For printing at 1:1 scale a nozzle with a diameter of <= 0.25 is required
Layer height should be 0.05-0.20 mm
To make the logo multi-colored either a multi-material printer or changing filament during print is required
Note that this can be a fairly demanding print for the following reasons:
STL contains holes for the insertion of two magnets (5x2 mm) during print
Use of the "Pause at Layer Height" function is recommended to insert the magnets
For printing at 1:1 scale a nozzle with a diameter of <= 0.25 is required
Layer height should be 0.05-0.20 mm
To make the logo multi-colored either a multi-material printer or changing filament during print is required