Thingiverse
UBNT UniFi Wall Jack Spacer by mopar99
by Thingiverse
Last crawled date: 4 years, 7 months ago
This is a spacer to mount a UniFi AP AC Lite wifi unit on top of a wall jack. Basically a way to keep the unit clean and tidy in our house with out the eye sore of a jack and cable being exposed.
4 - M4x6 Screws to mount the Ubnt Unifi Plate to the mount and 2 - M3 size screw to attached to wall jack plate. I drill 2 holes roughly the size of m3 screw and then screw into them wall plate. You could use long screw and put nut on the back side, just an option if needed. I used hex pan head because that what I had readily available at the time. The patch cable is less than a foot long, coiled up inside the spacer.
4 - M4x6 Screws to mount the Ubnt Unifi Plate to the mount and 2 - M3 size screw to attached to wall jack plate. I drill 2 holes roughly the size of m3 screw and then screw into them wall plate. You could use long screw and put nut on the back side, just an option if needed. I used hex pan head because that what I had readily available at the time. The patch cable is less than a foot long, coiled up inside the spacer.