Thingiverse
Two-Piece Locking Puzzle by mareklew
by Thingiverse
Last crawled date: 3 years, 1 month ago
A puzzling puzzle ;-)
The idea, is, of course, to separate the puzzle parts.
Even if you know what's inside, it might be a slight challenge ;0)
Printing and assembly
Prepare:
You will need:
4 metal (I used steel) balls about 9mm in diameter (slightly smaller shall work too)
4 pieces of metal rod ∅4mm (I used brass rod), each about 28-30mm long.
Sand rod ends so that they are rounded. Best done by chucking the rods in a lathe, but an electric drill will do nicely too.
Printing
Stop printing at 19mm layer height and put the balls and rods in (the balls in the round open holes, the rods in the slot joining ball holes, two in each puzzle half). Resume print.
Attention
If you print through, it will be impossible to assemble the puzzle!
If you can't stop the print mid-way, split the puzzle at about 18mm layer height and glue the assembly together after printing.
The idea, is, of course, to separate the puzzle parts.
Even if you know what's inside, it might be a slight challenge ;0)
Printing and assembly
Prepare:
You will need:
4 metal (I used steel) balls about 9mm in diameter (slightly smaller shall work too)
4 pieces of metal rod ∅4mm (I used brass rod), each about 28-30mm long.
Sand rod ends so that they are rounded. Best done by chucking the rods in a lathe, but an electric drill will do nicely too.
Printing
Stop printing at 19mm layer height and put the balls and rods in (the balls in the round open holes, the rods in the slot joining ball holes, two in each puzzle half). Resume print.
Attention
If you print through, it will be impossible to assemble the puzzle!
If you can't stop the print mid-way, split the puzzle at about 18mm layer height and glue the assembly together after printing.
Similar models
thingiverse
free
Puzzle lock for geocache by Gelb153
...height of 41mm. insert the bold with the ball in the case (check the opening at the front is correct)
4) finish printing the case
thingiverse
free
(Magnetic) Ice Crystal Mosaic Puzzle by Marenne
...separately (with different colors e.a.), make sure to print the medium pieces twice. you need 24 of them.
don't use supports!
thingiverse
free
Centrifugal Force Puzzle by PrintXYZ
...don't have a drill bit, then use any other similar sized object that you can jam in to clean...
thingiverse
free
Impossible Dovetail Puzzlebox Improved by Geowulfie
...switching between metric and imperial units, that's just how they size magnets and ball bearings when you buy them on amazon
thingiverse
free
Vanishing Space Puzzle by gibell
...d cut it off so it sticks out about 3 mm. test the pieces to make sure they go together. finally superglue each piece together.
thingiverse
free
Rubik's planetary gear puzzle by faggahz
... sun top pieces.
glue sun pieces to sun stem, use m3 rods for good connection
when finished, lubrificate with vaseline. colorize.
thingiverse
free
Puzzle Test by thumper06
... female puzzle piece with different offsets until the pieces fit together the way you want
you will need freecad to run this test
thingiverse
free
Hanayama Titan puzzle
...o ball bearings and the .125" rod are in no way magnetized to each other or the puzzle will be very difficult or unsolvable.
thingiverse
free
Puzzle Ball by jaln
... snaps, it's not a big deal. just make sure the faces are flush and glue together.
there is also a stand file included here.
thingiverse
free
Pig Puzzle by Rick_S
...(127mm) square grid.
i did print a full size version, but i gave that to the owner of the wooden puzzle and creator of the model.
Mareklew
thingiverse
free
Gear toy - meshing gears by mareklew
...gear toy - meshing gears by mareklew
thingiverse
well, this is just a motion toy to play with intermeshing gears.
thingiverse
free
Weaving tablets with a box by mareklew
...quare 0.8mm thick. having them just a hair under 50x50 allows for nice grid-printing on the usual bed sizes (200x200 or 200x250).
thingiverse
free
Speaker protector for Behringer MS40 active loudspeaker by mareklew
...eaker, i will update the stl once i printed the updated version.
edit:
after five years of use they still serve their purpose :^)
thingiverse
free
Coaster stand for 4" 4 inch 100mm 105mm coasters by mareklew
...izing it too late and didn't care to go back all the way. i may update it shall anybody care for the design enough to ask ;-)
thingiverse
free
RODE Wireless GO II (GO 2) mic storage clip by mareklew
...cables are on the other side. so this is a clip-on frame to keep your senders and the receiver fixed and somewhat more protected.
thingiverse
free
Kindergarten backpack for a 3yo - with printed fasteners by mareklew
...ions for a backpack are provided (note, these are not for an adult, but for a kid about 90cm / 3ft tall).
see photos for details.
thingiverse
free
Sony FDR-X3000 AKA-MCP1 Lens Cap by mareklew
...39;ve made and it fits nicely. the size of the lens on the underwater housing is different from the lens of the aka-mcp1 however!
thingiverse
free
La Cerradura Doble - sliding key puzzle by mareklew
...ve the keys in proper order.
the keys are different from each other and fit as pictured (round corners to the outside).
have fun.
thingiverse
free
1610 CNC end stops / homing switches (X and Z adjustable) by mareklew
...d travel range
$131=105.000 //adjust to actual unobstructed travel range
$132=44.500 //adjust to actual unobstructed travel range
Puzzle
3d_ocean
$5
Puzzle
... can rotate, move or delete them easily. to change the puzzle image just replace the ‘puzzle_texture.jpg’ in the textures folder.
archibase_planet
free
Puzzle
...puzzle
archibase planet
puzzle toy enigma
puzzle n240111 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$10
puzzle
...puzzle
3dexport
this puzzle model consists of separate parts. suitable for 3d printing and further play.
3ddd
$1
pillow-puzzle
... пазлы , пазл , подушка
pillow-puzzle
3ddd
$1
Porada Puzzle
... журнальный , кофейный
стол журнальный porada puzzle 1000х500
3ddd
$1
Puzzle sofa
...puzzle sofa
3ddd
модульный
puzzle sofa
turbosquid
$35
Puzzle
...uid
royalty free 3d model puzzle for download as 3ds and max on turbosquid: 3d models for games, architecture, videos. (1300379)
turbosquid
free
puzzle pegboard with square and triangle puzzle
... pegboard with square and triangle puzzle for download as max on turbosquid: 3d models for games, architecture, videos. (1634635)
3d_ocean
$4
Puzzle Cube
...puzzle cube
3docean
clean cube fun puzzle rubik simple toy
this is a very clean and simple puzzle cube.
turbosquid
$19
puzzle
...oyalty free 3d model puzzle for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1363319)
Locking
turbosquid
$1
Lock
...ck
turbosquid
royalty free 3d model lock for download as fbx on turbosquid: 3d models for games, architecture, videos. (1286851)
3d_export
$5
lock handle
...lock handle
3dexport
lock handle
3d_export
$5
hinged lock
...hinged lock
3dexport
hinged lock
turbosquid
$1
Lock Box with combination lock
...ee 3d model lock box for download as 3ds, obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1215494)
turbosquid
$2
Lock
...
royalty free 3d model lock for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1452660)
turbosquid
$35
Lock
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$24
lock
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Lock
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$6
Lock
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$4
Lock
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Piece
archibase_planet
free
Piece
...piece
archibase planet
sand-box playground
piece 8 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Piece
...piece
archibase planet
smithy forge farriery
piece 12 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
turbosquid
$7
piece
...turbosquid
royalty free 3d model piece for download as sldpr on turbosquid: 3d models for games, architecture, videos. (1407696)
archibase_planet
free
Piece
...piece
archibase planet
merry-go-round roundabout carrousel
piece 5 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
free
Lego piece
...lego piece
3dexport
lego piece<br>.stl
turbosquid
free
Chess Pieces
...es
turbosquid
free 3d model chess pieces for download as fbx on turbosquid: 3d models for games, architecture, videos. (1502330)
turbosquid
$5
Skywalk Piece
...quid
royalty free 3d model skywalk piece for download as max on turbosquid: 3d models for games, architecture, videos. (1422588)
turbosquid
$1
chess pieces
...squid
royalty free 3d model chess pieces for download as obj on turbosquid: 3d models for games, architecture, videos. (1562332)
turbosquid
$1
chess piece
...osquid
royalty free 3d model chess piece for download as fbx on turbosquid: 3d models for games, architecture, videos. (1369649)
turbosquid
free
Chess Pieces
...uid
royalty free 3d model chess pieces for download as blend on turbosquid: 3d models for games, architecture, videos. (1323069)
Two
turbosquid
$4
Two Axes Two States
...free 3d model two axes two states for download as obj and fbx on turbosquid: 3d models for games, architecture, videos. (1468396)
3d_export
$5
s of two one and two
...blender file. one burner cooker: vertices: 16,221 faces: 14,780 triangle: 31,490 two burner stove: vertices: 25,200 faces: 23,625
turbosquid
$20
two
...osquid
royalty free 3d model two for download as 3ds and stl on turbosquid: 3d models for games, architecture, videos. (1435051)
3ddd
$1
avec two
...avec two
3ddd
jmm , avec two
jmm avec two
3ddd
$1
cea two
... вентилятор , потолочный
cea two
все размеры
vray+corona
3d_export
$5
Two speaker
...two speaker
3dexport
this is a 3d model of two speakers from sven
3d_export
free
Two wall
...two wall
3dexport
two wall<br>.blend
design_connected
$29
All-Two
...all-two
designconnected
bonaldo all-two computer generated 3d model. designed by bicego, sergio.
design_connected
$9
Two Timer
...two timer
designconnected
established & sons two timer computer generated 3d model. designed by industrial facility.
turbosquid
$21
DAVENTRY Two Over Two Chest of Drawers
... chest of drawers for download as max, max, max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1684477)