Twinkling Star Tree Topper by Witchagreen

Last crawled date: 3 years, 5 months ago

This is a Christmas/holiday tree topper with a slot in the back for the base of an LED tea light--just pry the top off the tea light and place the LED/battery part into the back of the star. I used a flickering tea light, which makes the star "twinkle." You might also want to glue the tea light base into the slot, but I found that mine fit securely enough without gluing it. The tea light I used measured about 37mm across (which is probably standard for this kind of tea light) and the base part by itself measures about 35mm. The topper is compact enough to be printed on a print bed as small as 100mm x 100mm.