Thingiverse
Twin loc-line arm mount for camera tripod socket by thenickdude
by Thingiverse
Last crawled date: 4 years, 8 months ago
This mount allows you to attach 2x Loc-Line arms to the bottom of your camera, using its tripod socket.
Print settings:
Layer height: Not critical, I used 0.2mm
Filament: Anything, I used PLA
Infill: 20% grid
Perimeters: 3
Parts required:
1/4-20 1" long screw for tripod socket
1/4-20 1 3/4" long screw for joining Loc-Line cups
1/4-20 hex nut x 1
1/2" Loc-Line Flat Mount x 2 (part number 51895)
1/2" Loc-Line segments as required to get the length of arms you want
If you liked this design you'll probably like my other macro-photography focused designs, check them out:
https://www.thingiverse.com/thenickdude/designs
Print settings:
Layer height: Not critical, I used 0.2mm
Filament: Anything, I used PLA
Infill: 20% grid
Perimeters: 3
Parts required:
1/4-20 1" long screw for tripod socket
1/4-20 1 3/4" long screw for joining Loc-Line cups
1/4-20 hex nut x 1
1/2" Loc-Line Flat Mount x 2 (part number 51895)
1/2" Loc-Line segments as required to get the length of arms you want
If you liked this design you'll probably like my other macro-photography focused designs, check them out:
https://www.thingiverse.com/thenickdude/designs