Thingiverse
TwentyFour-7 2" Quad by jimbo_wa
by Thingiverse
Last crawled date: 3 years ago
Inspired by the RS90, FlexRC Owl and DJ105 enclosed prop designs, I have set out to make a capable 2S indoor and outdoor quad that you can easily create at home, add your own electronics stack and fly without fear of breaking.
There is now a 15x15/16x16mm slot and 20x20mm FC mounting holes on the top and bottom frames. If you want to use an AIO stack, you may need to fiddle a bit to get everything in - especially with a 20x20mm stack!
There are now larger slots top and bottom for the battery strap and the USB port is no longer covered by a standoff.
You can run in a pusher or puller prop configuration (I prefer pusher with reversed prop directions).
My build list:
2mm nylon hardware (x20 M2x10mm)
15mm standoffs (x10)
Racerstar 1103 motors (x4 10,000kv)
Gemfan 2040 quad blade props x4
Eachine Teenycube 15x15mm F3 Flight Controller with PDB
Racerstar 6A 1-2S ESC's (x4)
Runcam Nano FPV camera
Eachine VTX01 Super Mini 5.8G 40CH 25mW FPV Transmitter
Frsky R-XSR Rx
There is now a 15x15/16x16mm slot and 20x20mm FC mounting holes on the top and bottom frames. If you want to use an AIO stack, you may need to fiddle a bit to get everything in - especially with a 20x20mm stack!
There are now larger slots top and bottom for the battery strap and the USB port is no longer covered by a standoff.
You can run in a pusher or puller prop configuration (I prefer pusher with reversed prop directions).
My build list:
2mm nylon hardware (x20 M2x10mm)
15mm standoffs (x10)
Racerstar 1103 motors (x4 10,000kv)
Gemfan 2040 quad blade props x4
Eachine Teenycube 15x15mm F3 Flight Controller with PDB
Racerstar 6A 1-2S ESC's (x4)
Runcam Nano FPV camera
Eachine VTX01 Super Mini 5.8G 40CH 25mW FPV Transmitter
Frsky R-XSR Rx
Similar models
3dwarehouse
free
Eachine Aurora 100 bottom plate
...eachine aurora 100 bottom plate
3dwarehouse
fpv eachine aurora 100 aurora100 racer drone quad
thingiverse
free
Micro brushless quad (Martian/Alien inspired) by ricsuth
...mah 30c has nice long jst lead for this)
props - frame can probably take up to about 60mm diameter
paint - plastic one coat paint
thingiverse
free
Eachine 1000TVL Holder by HWAsian
...le closest to the rear of the quad.
this is a holder for the eachine 1000tvl ccd camera for quads. requires 2 m3 screws and nut.
thingiverse
free
Fpv antenna holder for Eachine Wizard x220
...sions: 6mm diameter, 35mm height for the standoffs and a space of 34.5mm in between the two standoffs (measured from the center).
thingiverse
free
2S lipo box for eachine vr-008 (Bangood 1086635) by aalbinger
...box facing the user.
http://www.banggood.com/eachine-2s-7_4v-1000mah-30c-jst-battery-for-eachine-vr008-fpv-goggles-p-1086635.html
thingiverse
free
Snapy - brushless Tiny Whoop 3inch top and bottom plate by tjkim93
...less tiny whoop.
4 bolts and 2 nuts are used for bottom plate fix.
2 bolts and 2 plastic hex supports are used for top plate fix.
thingiverse
free
Eachine Wizard x220s Top and Bottom Plate by Janbo
... plate onto the abs print to strengthen the frame.
when using these printed parts, you can add additional standoffs at each side.
thingiverse
free
Flight controller stack adapter (30.5mm <--> 20mm) by Dayve
...ily printed without supports. you can override this if you really want the stl as one piece and you want standoffs on the bottom.
thingiverse
free
FPV Cam mount by AmyCantFlyNow
...e top and bottom plates and comes out slightly as i have a little x quad with almost no room for anything but the pdb, fc and rx.
thingiverse
free
VTX03 20x20 Mount by ScottWilliamson
...keep debris out.
softmount standoffs should be used with this part.
can be combined with this rx mount
should be printed in tpu.
Twentyfour
thingiverse
free
TwentyFour-7 2" Quad Turbowing camera mount by Ghostface
...d like to mention that i took inspiration from this thing but designed it from scratch: https://www.thingiverse.com/thing:2530332
renderosity
$7
VERSUS - dForce - Slingback Dress for G8F
...dress for g8f by lully.<br /> this set contains twentyfour ,high quality textures for all then pieces of the...
grabcad
free
Wire Basket
...meaningful name could be » flower vase, surrounded by twentyfour bars of a cage « 24 hours has a...
3dwarehouse
free
Diekman Es: Honhof Es 1, 7541 CH Enschede
...honhof es 1, 7541 ch enschede 3dwarehouse one of twentyfour similar houses which are build by e2000 within the...
3dwarehouse
free
Sun Temple
...shape of a colossal chariot with seven horses and twentyfour wheels , carrying the sun god, surya, across the...
Jimbo
3d_export
$29
Built In Oven Franke CM 74 M 3D Model
...built in oven franke cm 74 m 3d model jimbo 5612...
thingiverse
free
jimbo by scottygreen135
...jimbo by scottygreen135
thingiverse
its jimbo. takes about 35 mins to cook
thingiverse
free
Jimbos bus/car by Reaju2019
...jimbos bus/car by reaju2019
thingiverse
thingiverse
free
Schlüsselanhänger by da-Jimbo
...hlüsselanhänger by da-jimbo
thingiverse
schlüsselanhänger mit suzuki-schriftzug
außerdem mit jimny, vitara und swifti-schriftzug
thingiverse
free
Knopf by da-Jimbo
...knopf by da-jimbo
thingiverse
der alte knopf von einem bademantel ist leider beim waschen gebrochen.
somit musste ersatz her...
thingiverse
free
Jimbo Coaster Holder by UnknownPro
...ro
thingiverse
coaster holder sized for 10cm square coasters inspired by the black and blum designs for door stops and bookends.
thingiverse
free
Kabeleinführung by da-Jimbo
...mkabel über einer laminatholzdecke zu haben.
das kabel wird inkl. stecker durch die klappe geführt und über der decke angesteckt.
thingiverse
free
Jimbo, Gnomish Artificer by Traotor
... time an artificer gnome. the base should be 25mm wide in the x axis, or 28mm wide for more fine details. print without supports.
thingiverse
free
Jimbo the Robot by SickRanchez
...
limb panel (holes) x8
all parts print without supports except the chest and hips.
please post pics if you print and/or remix it!
thingiverse
free
Filamentdurchführung by da-Jimbo
...ders bei sehr rauem filament z.b. proto pasta edelstahl oder ht-pla lässt sich damit das filament sehr leicht aus der box ziehen.
Wa
3d_export
$15
wa men
...wa men
3dexport
simple rendering of the scene file
turbosquid
$10
WA 01 3ds
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
WA 2000 (LD)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
cg_studio
$18
Walther WA 20003d model
...lther wa 20003d model
cgstudio
.max - walther wa 2000 3d model, royalty free license available, instant download after purchase.
3d_export
$20
Walther WA 2000 3D Model
...e machine gatling submachine gun pistol handgun weapon game ready gameready
walther wa 2000 3d model martialartist 25312 3dexport
3ddd
$1
ORION WA 2-809/2 Antik
...orion wa 2-809/2 antik
3ddd
orion
бра
orion
wa 2-809/2 antik
размеры(мм): h400
humster3d
$75
3D model of Walther WA 2000
...y a detailed 3d model of walther wa 2000 in various file formats. all our 3d models were created maximally close to the original.
turbosquid
$60
WA 2000 Sniper Rifle PBR
...3d model wa 2000 sniper rifle pbr for download as obj and fbx on turbosquid: 3d models for games, architecture, videos. (1189756)
turbosquid
$10
Sconce Orion WA 2-1093
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
cg_studio
$25
AWom0002-Wa / 3D Human for superior visualizations3d model
...o - awom0002-wa / 3d human for superior visualizations 3d model, royalty free license available, instant download after purchase.
Quad
design_connected
$4
Quad
...quad
designconnected
brent comber quad computer generated 3d model. designed by comber, brent.
turbosquid
free
Quad
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$69
Quad bike
...uad bike
3docean
bike hi-poly moto quad quad bike quadbike
high-poly model quad bike. model uses mental ray materials and render.
3d_export
$14
quad bike
...quad bike
3dexport
3d_export
$50
Quad 3D Model
...quad 3d model
3dexport
quad atv
quad 3d model floris 64690 3dexport
turbosquid
$8
Space quad
...bosquid
royalty free 3d model space quad for download as stl on turbosquid: 3d models for games, architecture, videos. (1366239)
turbosquid
free
Ornament quad
...quid
royalty free 3d model 3d ornament quad for download as on turbosquid: 3d models for games, architecture, videos. (1628075)
turbosquid
$19
Quad Drone
...
royalty free 3d model quad drone for download as c4d and fbx on turbosquid: 3d models for games, architecture, videos. (1202459)
turbosquid
$150
Quad bike
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$119
Lego quad
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
7
turbosquid
$6
Rock 7-7
...urbosquid
royalty free 3d model rock 7-7 for download as obj on turbosquid: 3d models for games, architecture, videos. (1647866)
turbosquid
$8
Rock 7-7
...id
royalty free 3d model rock 7-7 for download as ma and fbx on turbosquid: 3d models for games, architecture, videos. (1693416)
design_connected
$16
No 7
...no 7
designconnected
sibast no 7 computer generated 3d model. designed by sibast, helge.
3ddd
$1
Team 7
...team 7
3ddd
team 7
моделилось с кталога team 7
3d_export
$5
hinge 7
...hinge 7
3dexport
hinge 7
turbosquid
$9
IS-7
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$12
Calligraphic Digit 7 Number 7
...hic digit 7 number 7 for download as max, obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1389338)
3ddd
free
team 7
...team 7
3ddd
team 7
стол фабрики team 7.
типы размеров /900,1000/x/1750,2000,2250/x/750/
раздвигается +600 или +1200
3ddd
$1
PLANTS 7
...plants 7
3ddd
цветы , горшок
plants 7.. hope u all enjoying the series
3ddd
$1
Pillows #7
...pillows #7
3ddd
подушка , pillows
pillows #7
3ds max 2011,fbx + textures
2
design_connected
$11
No 2
...no 2
designconnected
sibast no 2 computer generated 3d model. designed by sibast, helge.
turbosquid
$6
Cliff Rock 2-2
...uid
royalty free 3d model cliff rock 2-2 for download as obj on turbosquid: 3d models for games, architecture, videos. (1619161)
turbosquid
$29
Book variation 2 2
...3d model book variation 2 2 for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1366868)
turbosquid
$22
Classic baluster (2) (2)
...assic baluster (2) (2) for download as max, obj, fbx, and stl on turbosquid: 3d models for games, architecture, videos. (1483789)
turbosquid
$99
Smilodon 2 Pose 2
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Barrel Barricade 2-2
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$6
Wall Trophy (2) (2)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Tire label 2 of 2
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Кровать, 2 тумбочки, 2 светильника
...кровать, 2 тумбочки, 2 светильника
3ddd
кровать, 2 тумбочки, 2 светильника
нормальное качество
формат 3ds max
без текстур
3ddd
free
Кровать, 2 тумбочки, 2 светильника
...кровать, 2 тумбочки, 2 светильника
3ddd
кровать, 2 тумбочки, 2 светильника
нормальное качество
формат 3ds max
без текстур