Thingiverse
Turbowing Cyclops Camera Mount by RyThomas
by Thingiverse
Last crawled date: 4 years, 1 month ago
This is a mount for the Turbowing Cyclops v2 camera designed to fit the Gemini 2.5 frame (26mm spacing) or the MIB 2.5 frame (19mm spacing).
The spacing of the holes is 26mm or 19mm, designed to line up with front standoffs on frame.
The mount has 2 parts, top and bottom which screw together using m2x10mm screws.
Choose the bottom that fits your frame, top is same regardless
This mount fits the camera with a modified lens (m7 1.8mm 180 deg)
The stock lens (120 degree) is longer and won't fit well inside this mount
I used a zip tie to tension the camera rearward to reduce vibration (see photo)
UPDATE 7/23/18
Modified the top piece to include a retaining strap for the SD card. This strap wraps around the back of the camera and secures to the other side using a small screw.
Added a guard that fits on the side of the cyclops camera in front of the SD card. This guard should be glued into place and serves as a high point to prevent the SD card from ejecting in a crash.
The spacing of the holes is 26mm or 19mm, designed to line up with front standoffs on frame.
The mount has 2 parts, top and bottom which screw together using m2x10mm screws.
Choose the bottom that fits your frame, top is same regardless
This mount fits the camera with a modified lens (m7 1.8mm 180 deg)
The stock lens (120 degree) is longer and won't fit well inside this mount
I used a zip tie to tension the camera rearward to reduce vibration (see photo)
UPDATE 7/23/18
Modified the top piece to include a retaining strap for the SD card. This strap wraps around the back of the camera and secures to the other side using a small screw.
Added a guard that fits on the side of the cyclops camera in front of the SD card. This guard should be glued into place and serves as a high point to prevent the SD card from ejecting in a crash.